I. Safety performance
1. After the straw baler equipment is installed, the grounding protection terminal in the electric control box must be connected to the grounding angle iron by a single wire with a wire diameter not less than 16 mm2 (the grounding angle iron is installed by the customer). If the equipment is not connected to the grounding protection, it is forbidden to run. Regularly check whether the grounding protection line is well connected.
2. Fire fighting equipment such as fire extinguishers should be placed near the semi-automatic straw baler equipment, and operators should master the use of fire extinguishers; If there are abnormal conditions such as smoke on the site or equipment, use fire-fighting equipment in time and call the fire alarm number; When the equipment is running, children and irrelevant personnel are prohibited from approaching the equipment to avoid accidents.
Second, artificial assistance.
1. Straw baler is fully automatic equipment.
2. The semi-automatic straw baler needs manual assistance in some steps.
Third, the working principle
1. Straw baler is a kind of environmental protection equipment that compresses straw and straw into blocks by hydraulic principle, which is beneficial to the storage, transportation and utilization of straw.
2. The semi-automatic straw baler is designed according to the characteristics of straw. Packaging objects include wheat straw, corn straw, soybean straw, rice straw and other agricultural straws. Suitable for large farms, straw recycling companies and feed production.
Fourth, the structure
1. The straw baler includes a bracket with a bottom plate and front and rear baffles. A jack is installed on the bracket, and the jack has a piston rod. The right end of the piston rod is connected with a vertical push plate, and the right side of the push plate is connected with a push plate. The gap between adjacent push plates is the rope-passing groove on the plate.
2. The right end of the bracket of the semi-automatic straw baler is provided with a discharge port, the right end of the bracket at the discharge port is hinged with a door panel, the left side of the door panel is connected with a door panel strip, and the gap between adjacent door panels is a rope-passing groove on the door; A chamber surrounded by front and rear side baffles, a push plate mound and a bottom plate is a feeding chamber, and a chamber surrounded by front and rear side baffles, a pressing upper baffle, a door plate and a bottom plate is a material extruding chamber; The right ends of the door panel and the bracket are fixedly connected with a locking device.
Verb (abbreviation of verb) is used.
1. Straw balers are widely used in agriculture and animal husbandry, as well as various straw balers, waste paper factories, old recycling companies and other enterprises, which have played a great role in protecting the environment and resources.
2. Semi-automatic straw baler is suitable for packaging and recycling old waste paper and plastic straw, and it is a good equipment to improve labor efficiency, reduce labor intensity, save manpower and reduce transportation cost.