Product introduction
Ultra-fine high-pressure mist system is a large number of imported hosts and accessories on the basis of similar products abroad. Innovative energy-saving, efficient and cost-effective products. Example: Spray drying system makes it possible to humidify at low temperature. It can be applied to various industries, especially to solve the problem of high temperature humidification of industrial processes. Because the floating fog particles are as light as clouds, they are more elegant in the artificial fog landscape.
Characteristics of ultra-fine high-pressure micro-mist humidification system
◆ Energy saving
Atomization 1 liter of water consumes only 4 watts per hour, which is 1% of that of traditional steam humidifier and 1/10th of that of gas-water mixed humidifier.
◆ Efficient
The diameter of the droplets sprayed by pressurized water through a special superfine nozzle is only 3-5 microns, the utilization rate of water is over 90%, and the relative humidity of air can reach 65438 000%.
◆ Large amount of humidification
The amount of humidification is large and can be adjusted at will. The output flow of pumping station in high-pressure micro-fog system can be continuously adjusted from100 kg/h-1600 kg/h. The nozzle can be randomly configured within the flow range, and the pressure and flow rate of the nozzle can be accurately adjusted by adjusting the speed of the water pump.
◆ Reliable
Ultra-fine water mist humidification system adopts industrial American piston pump, which can run continuously. Nozzle and water mist distributor have no power wearing parts and are reliable for a long time.
◆ Hygiene
The atomized water in the superfine water mist system is not recycled, so it will not lead to the proliferation of bacteria.
◆ Short absorption distance
The diameter of fog particles sprayed by micro-fog system is less than 5 microns, which can be quickly absorbed by air in air conditioning and air duct, shortening the distance of fog particles being absorbed by air. Suitable for air conditioners with narrow humidification section and short distance.
application area
◆ Indoor direct humidification in tobacco and textile industries. Cooling, dust suppression and humidity control;
◆ Humidification of internal thermal electronic workshop. Cooling, removing static electricity and adjusting humidity;
◆ Humidification of automobile spray line. Eliminate static electricity and adjust humidity;
◆ Printing factory directly humidifies. Eliminate static electricity and adjust humidity;
◆ Humidify high-temperature places such as thermal power plants and steel mills. Cooling down;
◆ Application of agriculture, flower planting greenhouse, aquaculture and animal husbandry. Spraying, expelling insects, cooling and disinfecting;
◆ Outdoor entertainment, dining places and scenic spots. Cooling, artificial spraying to beautify cities and parks;
View legend
technical parameter
Model working pressure (Mpa) maximum spraying amount
(kg/h) Effective humidification amount, maximum pump power (KW) installation
Number of nozzles (unit)
SWW 1 5-7 600 480 3 100
SW w2 5-7 1020 8 16 5.5 170
SW w3 5-7 1500 1200 7.5 250
SW w4 5-7 2040 1632 1 1 340
Parts catalogue
System Name Main Components Technical Standard (Origin) Unit Quantity
The water softening capacity of water softener (optional part) in water treatment system is 100-3000kg/h (USA) 1.
The filtration density of ultra-fine filter is ≤ 1? M 1
The pressure of high-pressure piston pump in high-pressure pump station system is 10Mpa (USA) 1.
Inverter Japan Station 1
The maximum bearing capacity of the pressure sensor is 16Mpa, 1.
Programmable controller (optional) Japan Station 1
The maximum pressure of the drain valve is 15Mpa (Taiwan Province province) 1.
Spray system nozzle flow rate 6kg/h fog particles < 5? M Taiwan Province province number
The maximum bearing capacity of high-pressure resistant pipeline is 15Mpa.
The maximum bearing capacity of elbows and tees is 15Mpa.
The spray dryer (optional component) has no dripping water.
The measuring range of the humidity sensor (optional component) of the humidity control system is 0- 100% RH.
Some blocks (headers) with an accuracy of 2%
Multi-channel controller (optional) Japan 1
The maximum pressure of the high-pressure solenoid valve is 15Mpa.