Current location - Recipe Complete Network - Catering franchise - Dining chandelier installation Xiaobian teaches you the installation of two different kinds of lamps.
Dining chandelier installation Xiaobian teaches you the installation of two different kinds of lamps.

Many people think candlelight dinner is very romantic, but in fact, dinner with a warm and pleasing chandelier is also very atmospheric, and there is no need to light it with fire like candles. It can be said that it is also a good design to adapt to the rapid life of modern people. So, how to install the dining chandelier? How many types are there? What about the chandelier? Now Xiaobian introduces the two types of dining chandeliers to you, and introduces their respective installation methods in detail for your reference.

installation method/steps of ordinary dining chandelier

:

1. First, we turn on the lamp we just bought, and we will see all kinds of parts neatly placed inside

2. First, we take out the spare strips (iron bars in the picture below) and a screw

3. Then, according to the distance between the eyes of the lamp chassis, Fix the position of the screw cap and screw on the spare strip

4. Fix the spare strip on the roof after adjustment

5. Tear off the white film on the front of the lamp first

6. Turn the lamp over, cut off the rubber covers outside the two yellow power cords to expose the copper wires

7. Then connect these two cords with the two power cords on the roof and wrap them with adhesive tape. Then

9. After fixing the lamp, we have to start another step. First, take out the red lampshade in the box, like a little red apple.

11. Remove the nut and some metal plates on the lamp.

11. Then put it back, but a lampshade should be added in the middle. First, put a metal sheet on the lampshade, and then put another metal sheet under the lampshade and hold it with a nut, so that it can be fixed.

12. Then use this method to fix all four lampshades.

13. Then take out the energy-saving bulb that comes with the lamp and is plugged in. There are two pieces of metal on the bulb for you to plug in the lamp. Just aim at the socket and plug it in.

14. Then, take out the accessories inside the lamp, green leaves, and there will be a four-corner iron sheet in it to fix the three leaves. After fixing, take out the wires inside and fix them on the wires.

15 After stringing, use the self-contained ring on it to pass through the fixing holes on the lamp chassis, and you can hang it.

16. When you are all dressed, turn on the switch and you can enjoy the beautiful dining chandelier.

installation and matching of the three-head chandelier in the dining room

1. When installing the three-head chandelier, you should first punch holes with an inflatable drill and knock the expansion bolts into the ceiling.

2. Pull out the power cord in the ceiling, pass through the middle position of the hanging plate, then tighten the gasket and nut clockwise with a wrench, and fasten the hanging plate to the ceiling, so as to carry out a trial pull test to ensure that the hanging plate can bear the weight of the lamp.

3. hang the lamp body into the hook on the hanging board, pull up the wire in the lamp body, and connect it with the wire in the hanging board with the corresponding polarity, and then fix it with tie tape and wrap it with electrical tape to prevent leakage

4. finally, lock the safety screw after confirming that the wire is partially connected safely.

5. Installation and decoration skills of three-headed chandeliers in restaurants: Three-headed chandeliers are used in restaurants to illuminate food and make daily dining a pleasing thing. Choosing white and yellow light sources and mixing them to irradiate food can fully arouse your appetite.

above, xiaobian introduced two installation methods of dining chandeliers, one is general chandelier, and the other is triple chandelier. The general chandelier method is suitable for the installation of all dining chandeliers, but there is only one such quantity. If it is a triple chandelier, you need to consider the gap between the lamps. If the gap is too large, it will be uncoordinated, and if the gap is too small, it will appear too dense. I hope that the introduction of the above small series can give useful reference value to consumers who need to install dining chandeliers.

Tuba Rabbit online provides you with "decoration quotations, 1-4 local decoration companies, 3 sets of decoration design schemes" for free, as well as the decoration pit avoidance strategy! Click this link: /yezhu/zxbj-cszy.php? to8to_from=seo_zhidao_m_jiare& Wb, you can get it for free ~