Two summaries of personal work of quality inspectors

Summarization is to review and analyze a certain period, a certain project or some work afterwards, so as to draw a conclusion with regularity, which can help us find the rules in our study and work. Let's make a summary. So what's the format of the summary? The following is a summary of the personal work of the quality inspectors collected by me. Welcome to share.

personal work summary of quality inspectors 1

Time flies, and years pass by. In a blink of an eye, xx years will pass in tension and busyness. Looking back on this year, I have made a lot of progress as an inspector in the quality inspection department of the company, but there are also some shortcomings. The summary of my work is as follows:

In the past six months, with the care and guidance of the leaders and the support and help of my colleagues, I have not only completed my job diligently and practically, but also successfully completed all the temporary tasks assigned by the leaders, and I have improved myself in all aspects. In order to do a better job in the future, sum up experience and learn lessons.

1. Work Harvest

1. First piece inspection

I strictly follow the requirements of the control plan, so as not to miss inspection, but not to miss many inspections.

2. Patrol inspection

Patrol inspection is a meticulous work. "Details determine success or failure". In the process of inspection, the products with process flow must go through relevant procedures according to the product flow control procedure before being released, and the previous process should be responsible for the next process, and the next process should be reinspected, so as to ensure a level-by-level check.

3. Abnormal feedback < P > In production, various abnormalities often occur due to equipment or employees, ranging from small damage to single components to large damage to batches of components.

Second, feelings and experiences

1. Attitude determines everything

You must be meticulous and careful in your work. You can't always make mistakes. If necessary, check your work results to make sure your work is foolproof. After work, we should always sum up work lessons, constantly improve work efficiency, and sum up work experience. Although I will make some mistakes in my work and be criticized by my leaders, I don't think it is a shameful thing, because I think these mistakes and criticisms can help me avoid similar mistakes in my future work and make me grow up faster in my work. During the period of working with you, I was deeply impressed by their rigorous and serious work style, and I also learned a lot from them that I lacked.

2. Be diligent in thinking

The daily work of the post is complicated, which requires us to be diligent in thinking, improve working methods, improve work efficiency and reduce working hours.

3. Keep learning

I should constantly enrich my professional knowledge and skills, which will make my work more handy.

If a person wants to make a difference in his position, he must be familiar with the professional knowledge of the position and broaden his knowledge through continuous learning.

Third, their own shortcomings

1. Occasionally, careless work leads to work mistakes, which brings unnecessary trouble to the work. In the future, I will carefully complete my job with a rigorous working attitude

2. I will further strengthen the systematicness and scientificity of component inspection and improve the ability of comprehensive analysis and problem solving

3. On the basis of completing the tasks assigned by the leaders, I will give full play to my own advantages, continue to strengthen the study of professional knowledge, and further improve the inspection skills of various components

The work plan for four or xx years

In the new year, I am determined to seriously improve. In the future work, we should learn from other colleagues with an open mind, learn from good working methods and constantly improve our own quality, so that our overall quality can be improved to meet the development of the company and the needs of society. It is necessary to further strengthen the professionalism, enhance the sense of responsibility, and raise the standard of completing the work. Summary of personal work of quality inspectors 2

In the first half of xx, under the correct leadership of the head office, with the strong support and help of leaders at all levels, our xx project closely focused on the business objectives of the head office with the guiding ideology of "fine management" and "five to five innovations", unified thinking, unity and cooperation, forge ahead and innovation, and provided each of us with strength for the comprehensive promotion of the work of the XX project. For the past half year, I have made the following personal work summary:

1. Work review

In the first half year of xx, the national money was tight, and it was difficult to carry out engineering construction in various places. In this big environment, our XX project relied on our own strength, and with the active help of the head office, the project was always under control. Because the construction period required by the owner is relatively tight, our construction task is also relatively heavy, and the blocks where we are located are mostly high excavation and high filling, and the land type is more complicated. In the face of such difficulties, all of us in xx Project are not intimidated by the difficulties, and actively exert our personal abilities and strive to serve the project construction well. As the section chief of project quality inspection, I report on hot thoughts. While completing all the work assigned by the leaders, I am more leading all the personnel in the quality inspection department to start quality accidents for the project construction.

second, the existing shortcomings and improvement measures

1, the business level should continue to improve. In the process of work, I found that my professional knowledge is not solid enough. If I want to be an excellent quality inspector, I still have a big gap. At the same time, I am not careful enough in my work arrangement, and I am not good enough and meticulous enough in my work arrangement in advance. In my future work and life, I will learn more professional knowledge and consult more experienced old workers. At the same time, I will pay attention to working methods and arrange my work in advance in my future work.

2. Unstable working mood, laziness and lack of solid work. Sometimes in the process of work, there is the idea of muddling along and being a monk for a day, which causes one's own low state in the process of work and restricts one's own development. In the future work, I will correct my attitude, constantly hone my will, exert my greatest energy in my post with a peaceful mind, and strive to create the greatest value for the project.

3. In the process of construction, sometimes the quality control consciousness of non-key construction parts is not strong, and the control is not in place. In the future construction process, I will have a correct attitude and strengthen on-site quality control, and whoever manages will be responsible. Strictly control the quality of the construction process, and be fully responsible for the project quality of the outsourcing construction team. Strictly implement the "three inspections" system in the quality control process to ensure the quality qualification rate of 111%.

Third, the work plan for the second half of the year

Summarizing the past is to do better tomorrow. XX is a year of development, but also a year of creating good results. I will continue to maintain high morale in the first half of the year and strive to do better in the second half of the year. In the second half of the year, my work has the following plans:

1. Continue to maintain the good momentum in the first half of the year, strictly control the quality, and strive for the second half of the year without rework or once.

2. Strictly implement the "five-to-five innovation" and "decimal system" of the head office.

3. The management of the outsourcing construction team shall be carried out in strict accordance with the provisions of "Eight Persistences and Eight Prohibitions", and there shall never be an illegal operation.

4. pay special attention to the overall work of the quality inspection department, do a good job in quality supervision and inspection in the construction process, and at the same time do a good job in passing, helping and taking.

5, strictly implement the company's rules and regulations, the implementation rate of rules and regulations is 111%.

6. Fill in the information in the office timely and accurately to ensure the smooth progress of measurement and meet the requirements of the supervisor and the owner.

7. Do a good job in the overall management of experimental instruments and measuring instruments, establish various instrument accounts, and keep handover records, and make an inventory of instruments at the end of the year.

8. Earnestly, timely and accurately determine the monthly engineering quantity, and there will never be a job buck passing.

People's life will not always be smooth and profitable. When we break through difficulties again and again and move towards tomorrow, we should be firm in our own pace, keep moving forward on our own routes, shape ourselves, and believe that we will reach the other side of success! ;