Current location - Recipe Complete Network - Catering industry - Round screen partition how to place?
Round screen partition how to place?
Division of the layout of the home, in order to allow space to be fully utilized, then the usual method is to make a round screen partition, not only will effectively divide the space, but also play a very good decorative role. There are many kinds of screen partitions, placed in different positions. Here we introduce you to the round screen how to place and round screen partition maintenance tips what it is.

a round screen partition how to place

1, screen partition is usually used in the hall or lobby in the placement and decoration, carving content is mostly large-scale humanities, myths or historical stories based on the carving techniques are generally used in relief, relief, etc., the depth of the carving is deeper, the line is rough, clear contours. Should not be too high or too low, but to moderate, generally two meters in height is more appropriate.

2, screen partition should be permeable. Therefore, to transparent frosted glass and heavy wood is good, if the pursuit of style must be used for wood, but also should be used in brighter shades rather than fancy wood. Because the hue is too deep will be easy to have a sense of clumsiness, so that was not spacious living room screen has a suspicion of urgency, easy to make people have a sense of oppression.

3, the screen partition should be kept clean and fresh, if too much clutter piled up around the wind will wind up looking disorganized, but also will have an impact on the fate of the residence. If the screen partition is messy and dim, the whole room will look crowded and depressing. Screen if there is no outdoor natural light, to remedy with indoor lighting.

Two, round screen partition maintenance skills

1, first of all, the screen appearance do not be hard objects bump, to avoid scratching, puddling and other phenomena affecting the overall effect. In the placement of good not to be placed in direct sunlight can be placed, if the long-term screen will lead to discoloration of the fabric, glue layer falling, premature aging conditions.

2, secondly, screen cleaning is also a very important part. Generally speaking, if the screen cloth panel or glass panel infected with dirt and oil, you can first use a soft wet towel to scrub, and then use the old newspaper and then scrub again, so that not only can make the screen look new, bright and shiny, but also with a soft cloth scrubbing can be avoided to avoid residual debris in the above.

3, if the raw material of the screen is aluminum alloy raw materials, then good weekly cleaning once a week, with a dry towel dipped in water and wrung out, repeated a few times to wipe, if the top is stained with oil, available dry cloth or stain cleaner cleaning, bearing in mind not to use water to clean, if the stains on the extraordinarily difficult to clean, then you can use the special cleaner, spray a few in its appearance, and then use the flannel for the Scrub, the screen will still be the same as the original so new.

4, put the screen partition of the ground must be kept flat, four legs balanced on the ground. If the partition cabinet is placed, in a state of frequent swaying and shaking instability, over time will inevitably make the mortise and tenon or fasteners off, bonding part of the crack, thus affecting the use of the effect and reduce the life of the partition cabinet.

Round screen partition in home decoration is often used in the items and methods, and even is a major furniture in the family, has a good practical and decorative role. With the development of science and technology, now used for screen partition material is also more and more, for the round screen partition how to place also has a new method. I hope the above introduction can help you.