Current location - Recipe Complete Network - Catering industry - How to choose humidifier in electronic factory? The conservative practice of most manufacturers is to use ultrasonic humidifier, but it is not. Anhui Baxter humidifier solves your problems.
How to choose humidifier in electronic factory? The conservative practice of most manufacturers is to use ultrasonic humidifier, but it is not. Anhui Baxter humidifier solves your problems.

Anhui Baxter humidifier frequency conversion ultra-fine mist humidifier

Product introduction

Ultra-fine high-pressure micro-mist system is a large number of imported hosts and accessories based on similar foreign products. Innovative energy-saving, efficient and cost-effective products. Example: The mist dryer system makes it possible to humidify at low temperature. And can be applied to various industries, especially solving the problem of industrial technological high-temperature humidification. Because its floating fog particles are as light as clouds, it is more elegant in the artificial fog landscape.

Characteristics of ultra-fine high-pressure micro-mist humidification system

◆ Energy saving

Atomizing 1 liter of water per hour only consumes 4 watts, which is 1% of that of traditional steam humidifier and 1/11 of that of gas-water mixed humidifier.

◆ High efficiency

The diameter of the mist particles sprayed by the pressurized water through the special superfine nozzle is only 3-5 μ m, the water utilization rate is over 91%, and the air relative humidity can reach 111%.

◆ The humidification amount is large

The humidification amount is large and can be adjusted at will. The output flow of the pumping station in the high-pressure micro-fog system can be continuously adjusted from 111 kg/h to 1611 kg/h, and the spray head can be configured at will within the flow range. By adjusting the rotation speed of the water pump, the pressure and flow of the nozzle can be accurately adjusted.

◆ Reliable

The ultra-fine mist humidification system adopts industrial American piston pump, which can run continuously, and the nozzle and water mist distributor have no power wearing parts, which is reliable for a long time.

◆ Hygiene

The atomized water of the superfine mist system is not recycled, so it will not lead to the proliferation of bacteria.

◆ Short absorption distance

The diameter of the fog particles sprayed by the micro-fog system is less than 5 microns, which can be quickly absorbed by the air in the air conditioner and air duct, thus shortening the absorption distance of the fog particles by the air. Suitable for air conditioners with narrow humidification section and short distance.

scope of application

◆ direct indoor humidification in tobacco and textile industries. Cooling, dust suppression and humidity control;

◆ Humidification of internal thermal electronic workshop. Cooling, removing static electricity and adjusting humidity;

◆ Humidification of automobile spraying line. Eliminate static electricity and adjust humidity;

◆ direct humidification of printing plant. Eliminate static electricity and adjust humidity;

◆ Humidification in high temperature places such as thermal power plants and steel mills. Cooling down;

◆ Application of agriculture, flower planting greenhouse, aquaculture and animal husbandry. Spraying, expelling insects, cooling and disinfecting;

outdoor recreation, dining places and scenic spots. Cooling, artificial spray landscaping of cities and parks;

☆ See legend

Technical parameters

Model, working pressure (Mpa), maximum spray amount

(kg/h), effective humidification amount, pump power (KW), and maximum number of nozzles (units).

sww15-7 611 481 3 111

sww25-7 1121 816 5.5 171

sww35-7 1511 1211 7.5 251

sww45-7 2141 1632 11 341

parts list

system.

the water softening capacity of water softener (optional parts) in water treatment system is 111-3111kg/h (USA). The filtration density of 1

ultra-fine filters is ≤1? M sets of 1

high-pressure pump system, high-pressure plunger pump pressure 11Mpa (USA), 1

frequency converter, 1

pressure sensor, 1

programmable controller (option), 1

drain valve, 1.5 MPa (Taiwan Province), 1

spray system, and the nozzle flow rate is 6kg/h < 5. M several

high-pressure resistant pipes in Taiwan Province have a maximum pressure of 1.5 MPa m, several

elbows and tees have a maximum pressure of 1.5 MPa, several

foggers (optional parts) have no dripping water, and several

humidity sensors (optional parts) of wet control system have a measuring range of 1-111% RH

and a precision of 2% (Nuojin).