1, advantages
1), colors and textures are widely selected, and the same color and different textures can be combined to derive n kinds of products. For example, pure paper is only flat printing, and PVC can do concave-convex and sandblasting (smooth and texture combination effect);
2), you can easily use patterns, this kind of latex paint is difficult to achieve the effect and achieve the desired effect. For example, the contrast of stripes makes the room more layered, and vertical stripes can have the effect of "pulling out the seedlings to encourage them". Large/small patterns can be used to adjust the sense of space in the room;
3) Because of the characteristics of wallpaper, it can play a very good sound absorption effect. Especially the type of surface concave-convex treatment;
4) Compared with the cracks in the wall that are difficult to crack, wallpaper is a once-and-for-all solution. Latex paint film has limited effect on wall cracks, even if glass fiber mesh is attached. Wallpaper solves this problem very well. If it is only because of cracks, it is not expensive to choose the basic wallpaper with the basic color.
2. Deficiencies
1), say glue first. The requirements for wallpaper paving are the same as latex paint. That is, the original wall treatment (such as brushing interface agent, cracking pretreatment, etc.). ), and a batch of putty scraped. Using basement membrane rubber powder to spread wallpaper, the price of basement membrane rubber powder with natural crops as raw materials is not as expensive as expected, as long as it passes the relevant environmental certification, there is no problem. Latex paint can only claim ultra-low VOC, but it cannot guarantee zero volatilization. If you care too much about formaldehyde, I will tell you that it is also in your clothes.
2), seams, empty drum become warped edge is not a process defect, is the construction technology is unqualified. Empty drum, warping and joints are all construction problems when the base is not handled well. It has nothing to do with wallpaper and materials. Of course, don't compare with the poor restaurant, KTV. The materials they used and the construction time were scary.
3) There will be chromatic aberration, and the chromatic aberration of the same batch of products can be ignored. In addition to the basic color, the color difference of latex paint is much larger than that of wallpaper as long as it is repaired. These two points can be solved by thinking control;
4) As for fire prevention, don't be too nervous. The main purpose of fire fighting is prevention, and the control of fire source is very important. For families, the hidden dangers mainly lie in the kitchen (some have alarm) and electrical parts (hydropower construction specifications, the selection of switch sockets is also very important). In wallpaper, PVC is flame retardant. Although pure paper and non-woven fabrics are combustible, they are not as fierce as textiles and plastics.
Second, advantages and disadvantages of latex paint
1, advantages
1), low cost, including basic treatment and labor per square meter, and the price is 25~50 yuan/㎡;
2) The process is not complicated, and basic treatment is the key. If cracks have been found in the wall and need to be treated in time, the more effective way is to brush the interface agent and paste the fiber cloth to avoid cracks caused by temperature and humidity.
3) You can match colors flexibly to achieve the color matching you need. Remember to ask the construction party to leave some colored paint after the renovation, so it is inevitable to bump when moving. The cost of re-toning and color cards is an extra expense;
4) If the light color is damaged, it can be directly painted for repair. If you want to renovate or renovate after a few years, as long as there is no problem at the grassroots level, you can only repaint it on the original basis.
2. Advantages
1), although the color can be adjusted, but the color is single, no design and color. Some dark paints are difficult to grasp, so don't try them easily without the participation of professional designers.
2), the shortcomings of cracking have been mentioned many times above, which is a common problem of latex paint/coating;