Concern about the renovation of kitchen water and electricity 1. First, you should consider what electrical equipment your kitchen needs, such as oven, microwave oven, kitchen treasure, disinfection cabinet, even refrigerator and rice cooker. On this basis, determine the placement and transfer position of the above items, and communicate with professional hydropower designers to get the hydropower transformation plan.
Pay attention to 2 in the renovation of kitchen water and electricity. Whether the kitchen is waterproof, according to the specification, the house without floor drain does not need to be waterproof; When buying a vegetable washing basin, try to choose a basin with an overflow, which can solve the problem of water leakage at home and downstairs.
Attention should be paid to the renovation of kitchen water and electricity. 3. Kitchen hot water supply: On the basis of centralized hot water burning or self-burning in the original community, determine whether the hot water supply mode of your kitchen is kitchen treasure, gas stove or other modes, so as to determine the direction and positioning of water pipes.
Pay attention to the transformation of kitchen water and electricity. 4. Pay attention to the need for water pressure after renovation, which is generally 1.5 times of the working pressure of water supply. Pressing for half an hour, no leakage, no pressure drop exceeding 0.05MP.
In the renovation of kitchen hydropower, pay attention to 5. The PE-RT home decoration pipeline is connected by hot melt, once molded, never leaking, and the temperature difference between high and low is1/kloc-0 ~-40 degrees; Especially, the cold brittleness resistance of PE-RT home improvement pipe is better than that of PP-R pipe. When the temperature is below -5℃ in winter, PP-R pipe is easy to crack in construction, while PE-RT pipe can be transported, constructed and used at low temperature.
Kitchen water and electricity transformation, pay attention to 6. Solution of high-power electrical appliances in the kitchen: At present, some power cords in the kitchen of new buildings are 4mm2 and some are 2.5mm2, and some family kitchens may use high-power electrical appliances such as "oven, microwave oven, kitchen treasure", which may involve the problem of changing wires. If the power of kitchen appliances is high, it is recommended that you use wires with the national standard of more than 4mm2, otherwise the wires will burn out after a long time, causing short circuits and unnecessary troubles.
Kitchen water and electricity transformation, pay attention to 7. After the kitchen circuit transformation is completed, it is necessary to comprehensively test the strong and weak current, and the weak current signal line should ensure that there is no signal flow; The resistance value of strong electrical insulation should meet the use standard of household appliances to ensure safety, and the kitchen should be splash-proof.