1. According to the Management Measures for Hazardous Waste Business License, it is necessary to apply for a hazardous waste business license. Can be handled by the local environmental protection department. ?
To apply for a hazardous waste collection and operation license, the following conditions shall be met:
1, rain-proof and immersion-proof means of transport
2. Packaging tools, transit and temporary storage facilities and equipment that meet national or local environmental protection standards and safety requirements.
3. Formulate rules and regulations, pollution prevention measures and accident emergency rescue measures to ensure the safe operation of hazardous wastes.
Second, the approval process
Units applying for hazardous waste business license (hereinafter referred to as the applicant) directly apply to the State Environmental Protection Administration. The Pollution Control Department of the State Environmental Protection Administration is responsible for accepting the application materials for hazardous waste business license. The applicant shall mail the application materials to the unit directly or by other means.
Within 20 working days from the date of accepting the application, the State Environmental Protection Administration shall review the certification materials submitted by the applicant and conduct on-the-spot verification on the operation of the applicant's facilities.
In line with the conditions, it shall issue a hazardous waste business license and make an announcement; Do not meet the conditions, it shall notify the applicant in writing, and explain the reasons for the need for hearing, monitoring, identification and expert review in the process of approving the hazardous waste business license according to law. Provisions are not calculated within 20 working days as mentioned in the Measures.
Extended data
(1) According to the requirements of the equipment operation manual, the oil changed from the oil tank (or oil pan), pipes and accessories of the equipment lubrication system is analyzed and identified by scientific means.
(2) Some equipment leaks oil locally due to design, assembly, repair, use and maintenance, and oil collected by containers such as plates, barrels and boxes.
(3) Oil released when repairing equipment and cleaning lubrication system.
(4) Replace the lubricating oil parts and pour out the lubricating oil.
(5) Cleaning oil for cleaning parts of wiping equipment.
(6) Waste oil screwed out or extruded from cotton yarn, rags and plastic foam is used for lubricating oil.
(7) Waste oil recovered when treating waste emulsion, etc.
Baidu encyclopedia-oil production
Baidu Encyclopedia-Measures for the Administration of Hazardous Waste Business License