1, first you need to remove the outer lampshade. The removal method of the lampshade is relatively simple, because there is a small button on its side. As long as you press it, you can break the buckle, and then take off the outer lampshade counterclockwise to see the internal wiring.
2. Remove the live wire and the neutral wire with a screwdriver. Remind us to turn off the power first to ensure the safety of our disconnection. Remove the chassis directly. One of them is embedded, and there are no screws. This one can be pulled down directly, because it is attached to the ceiling. Just remove the clip as a whole first.
3. If installation is required, the base should be installed first, and the installation position should be determined. Punch holes at the marked positions and install expansion screws. Fix the base first, and pay attention to the same diameter as the depth of the screw when drilling.
4. The base is installed in place, and then the wires need to be connected. Of course, it is necessary to close the main valve before to prevent leakage. After connecting the wires in place one by one, finally tighten the lampshade and break off the outer buckle, and you can install it in place.
Ceiling lamp style
1, ceiling lamp is the most common type of lamp, which means it can be installed directly on the ceiling. The kind with a slightly flat top that can be completely attached to the roof is called a ceiling lamp. You can use ordinary white bulbs or fluorescent lamps, including LED lamps, among which LED lamps are the most popular.
2, according to the style can be divided according to its shape, some are square, some are round or semi-circular, and some are small rectangles or semi-flat spheres, and so on.