Print Settings: When printing invoices and tax returns, taxpayers must make the following print settings:
Click "Print Settings" at the top right of the page, and click "Add" to refer to the printer type: select the printer name actually used by the enterprise in the drop-down menu and display it on the printer body, such as four-way OKI5560SC. If the printer type is no longer selected in the list, you can choose the model and invoice type at will; Select the invoice type that the enterprise needs to print in the drop-down menu, such as the general machine of Zhejiang State Taxation Bureau. Left margin and top margin; Taxpayers can adjust the printing position according to the input values of different invoices (it is suggested that taxpayers set this value to 0 before printing for the first time, and cut it into the invoice size with ordinary paper such as A4 paper to test the printing position of invoice sets).
Enabled: automatically displayed as enabled.
After the above settings are completed, click Print (don't close the print settings interface at this time), and the sample ticket will be printed. Taxpayers will compare the ticket sample with the actual paper invoice location. If there are still deviations, continue to enter the values for adjusting the top, bottom, left and right margins in the print settings interface, click Print again until the printed sample ticket position is consistent with the actual paper invoice, and click Save to close the interface. Note: When the taxpayer prints for the first time, if the system can't print normally, he can click "Download" at the upper right of the online invoice service, enter the download center, download and install the "Add Electronic Invoice Printing Control Registration File", and then restart the computer to print the bill.
General machine pushes invoice 1 and general machine pushes invoice, but in different forms. The management process and legal effect are the same.
2. The billing software is downloaded by the local taxation bureau and can be found on the website of the local taxation bureau.
3. If you have any questions, you can contact the Director of Taxation.
What kind of printer should I use for the invoice of the flat push universal machine? Just push the needle printer with 80 columns (A4). The error rate is relatively low.
Epson's LQ630K-635K-730K can meet your requirements. These three models are similar in price and function. 1600 or so, no invoice will be issued. The price of 630K is the cheapest and the cost performance is higher. In addition, the cheaper ones are oki and Mei Ying. Just choose according to the local price and after-sales service. Your budget is a little low.
Buying second-hand machines is not recommended. Most stylus printers are very strong, and second-hand stylus printers usually take a long time to be eliminated. The quality is not guaranteed.
How to set the invoice amount of general machine flat invoice100000 yuan ordinary ticket need not be set, but should be set according to the invoice denomination, as long as it is not over the limit when invoicing.
How to change the invoice date of Guangdong national tax general machine (flat push type) should be set by the system and cannot be changed at will.
How to set up the general electronic flat invoice format for printers? Urgent! Set "Debugging Print Index" in the online invoice application system. For details, you can also add 492577060 for consultation.
What are the meanings of Chengdu national tax "general machine flat push invoice (1 ten thousand yuan)" and "general machine flat push invoice (1 ten thousand yuan)"? If it is a 10,000-yuan version, the highest selling price is 9,999 yuan. You can apply to increase the invoice amount the next time you receive the invoice.
How to set 1 for printing national tax invoices with Nantian pr9 stylus printer? After installation, you can print.
2. Before printing, in the printing settings, try to print with a sample ticket to see if the printing position is accurate. Inaccuracy can be adjusted. After adjustment, enter it again until you are satisfied. After saving the settings, you can officially make out an invoice and print it.
If you look at the adjustment in the settings carefully, you can use positive and negative numbers to adjust. For example: XX mm to the left. In fact, if you want to adjust it to the right, use a negative number to adjust it: -xx mm (see the prompt in your settings for details).
3. If there is no ticket sample, you can photocopy the invoice and cut it into the same size as the invoice for trial printing.
4. If it is just an ordinary VAT invoice, the printing position is not high. If it is a special invoice, the printing position is higher, mainly because the password area is accurate. Please make more adjustments in the print settings. It is true that the position of the first invoice is not properly opened, and it can be adjusted again. Invalid at most one invoice, don't be too nervous.
How to buy a printer when the national tax machine pushes invoices? Hello, Miss Li from the accounting school will answer your questions.
Recommend an Epson 630k
Welcome to give me a nickname-ask all the teachers in the accounting school.