Graphics or words that need bronze color only need to be marked in the same color as other drawings in AI, and it is enough to write bronze color, preferably on the same floor.

The specific steps are as follows:

1. Open the AI software and create a new blank page.

2. Draw a box on the layer 1.

3. Create a new layer, and after the content is done, mark the part that needs bronze color.

Extended data

Matters needing attention

1. Suitable hot stamping foil must be selected according to different types of materials to be ironed. When hot stamping, master the three-way cooperation of temperature, pressure and hot stamping speed, which is different according to the different hot stamping materials and hot stamping areas.

2. When cutting, we should master the speed and direction of turning tool.

3. The electrochemical aluminum foil for hot stamping should be made of paper, ink (especially black ink), kerosene, compound glue and other materials, and the hot stamping parts must be kept dry to avoid oxidation or damage to the bronzing layer.

4. The general packaging is: 64CM× 120M, with one box for each 10 roll; The width is 64CM, the length is 120M or 360m or other special specifications (1.5m, the width is 1000m or the length is 3000m).

5. When stored, it should be placed upright, pressure-proof, moisture-proof, heat-proof and sun-proof, and placed in a cool and ventilated place.

Storage condition

(1) temperature 5℃-20℃

(2) the humidity is 30-70%

(3) Vertical placement

(4) Avoid direct sunlight