2. When installing, be sure to pay attention to the maintenance of the soft film, don't let the soft film touch the sharp edges around, and pay more attention to the damage of the shovel to itself.
3, pay attention to the lamp holder, tuyere, tube plate to keep level with the surrounding keel, and requires a firm flat can't shake.
4, no matter what kind of keel, local cycle twists and turns, local corner position should be aligned. For the structure of F code and flat code, in general, fix 1 screw or 1 rivet every 20cm.
5, smoke, ceiling lamp, positioning first, then do the wooden underframe, the bottom of the wooden underframe should be polished and lubricated, and pay attention to the horizontal height. If it is too low, it will simply highlight the trace of the chassis.
6. When installing the soft film light box, fix it from the middle to both ends, pay attention to the size of both ends and whether the weld is straight, and then make the angular position.
7. Find the position of tuyere smooth nozzle at tuyere and smooth nozzle, just like around. Install the soft membrane on the aluminum alloy keel, and pay attention to the straight angle.
8. When opening the lamp hole, mark the position of the lamp hole, carefully and accurately stick the PVC lamp ring on the bottom of the soft film, and remove the excess smallpox after it is firm.
9. After the shovel blade is pushed into the seam, make sure that the contact between the knife and the seam is firm, and pay more attention to the uniformity when it is pulled into the keel groove. Don't push too hard, or the blade will slip out of the buckle and hurt itself or the soft film nearby.
10, just open the PVC tank of the top object with a film sticking knife, then clean up the foreign matter and push it back into the tank. In view of the possibility of water leakage, a water outlet is reserved for this soft film smallpox construction, and a small amount of water will naturally flow out.