First determine the size of the hinge: open PS, fill in the size, and add the bleeding position to the filled size. Add 3MM deflation position on each side. For example, the width is 30CM, the actual filling is 30.6CM, the height is 20CM, and the actual filling is 20.6cm ... Remember that the unit is cm.
Second, determine the resolution of the hinge: the print resolution of the hinge is 300DPI, the input number is 300, and the selection unit is: pixel/inch, which is the general resolution of the printed output.
Third, determine the color mode of the hinge: the color mode of printing is CMYK, not RGB, so choose CMYK mode when you first create a new document.
4. Select View → Check in the PS menu bar: drag the ruler to the position of 3MM in the upper left corner with the mouse, and then release the mouse to see a blue line. After dragging the ruler to the position of 3MM on the upper left, the blue line will show a square area.
5. Drag the 3MM ruler out of the other three corners in turn: this is the printed bleeding line. The contents of the text and the main picture should not exceed this bleeding line position, and the parts other than the bleeding line should be cut off when printing.
Six or three creases should be fixed at the fold line position of each sheet: for example, a 30CM-wide crease should be made into three creases, and each crease should be 10CM, so we should fix the position of 10CM, as shown in the figure. The positions of 10CM and 20CM are marked with blue lines, and the position of the fold line should be blocked when designing text and picture contents.
How to use ps is one of the most widely used forms of leaflets. There are three pages and six pages in total. The international standard is 16, and the generous size is 285mm * 210mm (291mm * 216mm with 3mm bleeding). The detailed production process suggests searching online for relevant tutorials. It's hard to explain without a picture here! How to design the front and back of three folds with PS? 1. Baidu downloads a completed folding renderings and opens it with PS. 2. Open your own folded pictures and check out these three folded pictures with the marquee tool. 3. Put the downloaded renderings under the third floor. 4. Select the first one for free transformation (shortcut key Ctrl+T), then hold down the Ctrl key and drag with the mouse to align it with the angular position of the material. The remaining two are five, then copy the first fold for free transformation (shortcut key Ctrl+T), right-click to select "Vertical Flip", then right-click to select "Oblique Cut" and click on the red box position to pull up six, and the remaining two are carried out according to the same steps above. The following effect is repeated by Zhang Hecheng, which is equivalent to a three-fold effect map. Seven, add a vector mask, select a black and white gradient and drag it from top to bottom to form a reflection effect. Eight, add a simple background to set off the folds. Remember to save it! Find a corporate service and go to Pig Bajie. Com, delivery, acceptance and payment.