Translated, it can only get the guest permission of the CPU, and can never get the administrator permission in the virtual machine. So ... but I found a post in Baidu about installing mac in vm. You can try. I hope it works for you. Reprinted from /wenda/q/q 14255.html First of all, you must know the hardware configuration of your machine, whether the CPU supports sse2 or sse3, whether the hard disk is IDE or SATA, and what the motherboard chip is; PQ (partition magic), VMware (virtual machine) and daemon tool (virtual cd) are installed in xp. PQ recommends Chinese version above 8.0, and VM recommends English version 5.5. Prepare a DOS PQ CD, such as a tomato garden installation disk or something; Then create 1 new partitions with PQ under your XP. Assuming that your XP is installed on drive C, the location of this new partition must be behind drive C, but before drive D, choose FAT32 format, and the size must be "main partition", and it is recommended to be more than 6G. If you want to do primary application, it is recommended that 10G or more.

After the new partition is built, delete it from PQ and close PQ.

Open the top menu, select Run and enter diskpart. Start creating the AF partition that mac needs.

The first step is to enter the list disk (browse the hard disk first, you can list how many hard disks are on your machine, and the code of the hard disk will also be listed, usually disk0).

Step 2: Enter select disk 0 (that is, select the hard disk code named disk 0).

Step 3: Enter Create Partition Primary ID = AF (1to create the main partition, which is marked as AF. If it is successful, it will remind you that it has been successfully established.

Step 4, enter the list section (browse the partition on your hard disk, and now you can see an unknown partition, that is, the one with an * in front).

Step 5: Enter the selection partition 2 (selection partition, "2" is the label before the unknown partition).

Step 6: Enter active (Lecheng takes this main partition as the active partition).

But retreat, retreat.

It is suggested that Tboot should be used as the guidance menu for boot selection at the beginning.

Download tboot first, extract it to get 1 tboot files, copy them to your C drive, and set them as "archive". You can see a lot of words by typing "c:\boot.ini" in the address bar of disk C. After the last line is blank, type "c:\tboot="Mac OS X 10.4.7" (red department) to save and close.

Open the daemon tool and load your mac os x 10.4.7 ISO image.

Open the virtual machine step by step.

Click New Virtual Machine.

Select "custom", next.

Select New Workstation 5. Next.

Select "Other" at the top and "Free BSD" at the bottom. Next.

Guide the next step

Select "one", next.

Turn to "256", next step.

Select "Don't use network connection", Next.

Select "LSI logic", next.

Select Use Physical Disk (Advanced User), and then select Next.

Guide the next step

Just end it.

You can see 1 FreeBSD on the left side of the VM interface. Select it and make some settings on the right.

Double-click the hard disk, and the property box will appear. Click Advanced, tick before independence, select Persistent at the bottom, and click OK.

Double-click the CD of the CD-ROM drive, and the property box will appear. Select the virtual CD-ROM drive letter of the daemon tool in the use physical driver drop-down box, and then click OK.

Double-click the USB controller, tick off the alignment above, and click OK.

Double-click the audio, check the options in Device Status, and then click OK.

The preparatory work is completed and the installation begins.

Click "Start this virtual machine" and quickly click the mouse on the dark black virtual machine screen. No matter what "Esc" is on the button panel, the "Boot Menu" will be displayed, and the third "CD" will be selected. Display "Press any key ...", and then click the space bar of the keyboard.

You can see 1 gray apple, etc. , presenting language selection, selecting "Simplified Chinese as the main language" and so on.

Show the "Welcome to Installation Steps" interface, pull the virtual machine screen to the top, click "Practical Steps", select "Disk Things", and so on.

Select the top one on the left of the disk interface, which is your hard disk, and then click "Erase" next to "Rescue" on the right.

There should be1"disk0s2" on the left side of the disk interface, which is the af partition you created. Select it, and you should see that the volume format on the right is "Mac OS X extension (diary type)". Write a new name in the name, such as "MAC OS X", and then click "Erase" next to "Security Options" in my face to open a clear identification window.

Wait a minute. After the completion, that is, the "disk0s2" on the left side of the disk east-west interface becomes "MAC OS X". Then click on the top left corner of the interface to close the disk.

In the "Welcome to Installation Steps" interface, click "Continue" and then "Continue" to bring up a clear confirmation box, click "Agree" and "Continue", and click on your mac partition, which means "mac os x" and "Continue" as indicated by the green arrow.

Then click "Customize". Never click "Install" directly.

Enter the custom interface, uncheck the printer driver, click the box in front of the localization language to install only Simplified Chinese, put the box "x 1 1" at the end, open the bottom patch option, and tick the patch that meets your hardware. You cannot select more or less.

Then click "install" here to present the DVD, click "skip" directly, and then install it from the beginning, and wait ... it usually takes 20 minutes.

Finally, in the stage of "optimizing the installation volume", we should make good preparations. After completing the last step, you will be asked to restart. Click "Restart", ctrl and alt on the shortcut button panel, release the mouse pointer, click the red square in the upper left corner of the VM interface, and lose the virtual structure.

Put the CD with PQ in the CD-ROM drive, restart the pc, and choose to open PQ in DOS. It will give 1 reminders asking you to fix the dialog box, so be sure to say "No". Right-click drive C, select Advanced, set it as a utility, OK, execute, and then restart.

Take out the disc. After restarting, you can see the menu. Select your "Apple OS X 10.4.7" and start working on Apple.

If you are using a notebook, you may need to short the VGA interface before this. Look at the VGA word on the notebook. There are three rows of holes, five in a row. Undo them with 1 paper clips. Counting from left to right, connect the fourth in the first row with the fourth in the third row. )

That's all!

On the contrary, if you need to install Windows on a Mac, you should use another software of VM: VMware Fusion. If there are enterprise-level virtual architecture requirements, please apply VMware ESX server.