1. Extrusion and chamfering

Step 1: Select the text tool from the left toolbar.

Step 2: Type the required text. Here, we choose Educba as the text. We choose a font size of 40pt and a font type of "myriadpro".

Step 3: Use the selection tool to select the text, and then select the effect from the menu bar at the top of the screen.

Step 4: Click 3D and select Stretch and Bevel Effects.

Step 5: After clicking Stretch and Chamfer, a dialog box will appear. In the dialog box, select the position "Before Off-axis" and the drawing depth is 50pt.

Step 6: You will see the final text with the following effects.

You can try other postures with different axes, different depths and different angles.

2. Wrinkle and swelling effect

Repeat steps 1 to 3 from the last effect (3D).

Step 4: Click Distortion and Deformation, and then select Fold and Expand.

Step 5: Click "Wrinkle and Swelling" and you will see a dialog box. Select a value of 15% and click OK.

Step 6: The final text is as follows:

Depending on the desired style, you can change this value to "wrinkle" or "bulge".

Wrinkles (15%)

Final results

3. Rough effect

With this effect, you can have a general look at the text. Under "Distortion", select "Rough" and you will see a dialog box. According to your choice, you can choose smooth points or corner points to use. You can also increase or decrease the size.

The final result of coarsening

Rough (smooth point)

Final results

Adjustment effect

Select the adjustment under distortion and deformation, and you will see a dialog box. You can adjust these values as needed to adjust the text.

Select "Distortion" under "Distortion and Deformation" and you will see a dialog box. Adjust the angle Adjust the angle of the text according to your needs.

Twist Effect dialog box

The final result of distortion effect

5. Zigzag effect

Select the sawtooth under distortion and deformation, and you will see a dialog box. In the dialog box, make sure the size is small and check the relative size, because a large size and absolute value will make the word unrecognizable. You can choose to set the style of smooth points or smooth corners according to your needs. In this way, you can provide a zigzag effect to the text.

Sawtooth effect (smooth point)

Sawtooth effect (corner point)

stylize

Select Stylization from the menu bar at the top of the screen.

Projection effect

Select the shadow under styling and you will see a dialog box. In the dialog box, select the values shown below.

You can change this value as needed.

Feather effect

Select Feather under Style, and you will see a dialog box. You can adjust the radius in the dialog box.

Internal luminous effect

Under stylization, select Internal Luminance and you will see a dialog box. You can apply this effect to the center or edge of the text. You can increase or decrease the opacity and blur values as needed.

Internal luminescence

Internal luminous effect (edge)

External luminous effect

Under stylization, select interior lighting and you will see a dialog box. Adjust these values according to your needs.

Fillet effect

Under stylization, select Internal Luminance and you will see a dialog box. With this tool, you can provide beautiful circles for all corners of the text.

Graffiti effect

Select the graffiti under the style and you will see a dialog box. With this effect, you can add some notches to the text.

7. Vertex

Select Twist from the menu bar at the top of the screen.

Arc effect

Select "arc" under "warp" and you will see a dialog box. You can use this effect to make the text arc.

Arc reduction effect

Under meridian, select arc, and you will see a dialog box. You can use this effect to make the lower part of the text arc.

Over-arc effect

Select "arcupper" under "warp" and you will see a dialog box. You can use this effect to add an arc to the top of the text.

Convex effect

Select "arcupper" under "warp" and you will see a dialog box that can provide a protruding effect for the text.

Other effects in warp include flags, fish, inflation, fisheye, rising, squeezing, twisting, waves and so on.

Distortion (marking effect)

Distortion (fish effect)

Deformation (expansion effect)

Warp (rising effect)

Distortion (squeezing effect)

Distorted (fisheye)

Twisting (twisting effect)

Distortion (wave effect)

Conclusion:

In this way, various effects can be applied to the text being processed. Typesetting is not only an important feature of design, but also an art form. Choosing the right font, ideal spacing and accurate text form can be regarded as an important aspect that determines the success or failure of the project.