Photographing the solar eclipse with an ordinary digital camera requires smoked glass, waste film, welding pads, disks, and ink dripping in water. When shooting, it is best to use cable release or remote control to minimize the vibration of the camera. There really is no such thing. When you press the shutter by hand, you must pay attention to your strength.

Stick the filter film on the total solar eclipse observation mirror tightly to the lens without leaving any gaps. When the total solar eclipse basically takes shape, the sunlight drops sharply, so it is necessary to remove the filter film in time. Even if there is some light on the edge, it will not damage the camera because the intensity is already very weak.

Extended data:

Matters needing attention in shooting total solar eclipse:

1. Even during the partial solar eclipse, the sunlight is still very strong, so you need to use a filter that weakens the sunlight by thousands of times.

Because the image of the sun is very small, we should use as large a magnification as possible.

3. It is necessary to stabilize the camera and control the shutter with the remote control or cable release.

During the total solar eclipse, the intensity of sunlight will be reduced by 10,000 times. Remove the filter quickly and adjust the camera. You can shoot with F 1 1. 1/30).

Because the total lunar eclipse is short, we should race against time and shoot as much as possible.

6. When generating light, quickly install a filter to protect the camera. It is best to use a film camera.