The leakage of iron tiles in old houses is a common problem in old houses. If not handled in time, it will cause serious damage to the house. Here are several ways to deal with the leakage of iron tiles:

1. Determine the water leakage point

First, you need to find the leak. In rainy days, you can observe whether there is water leakage on the roof and mark it. It should be noted that the water leakage point is not necessarily where it actually rains, but it may be that water flows through the roof and leaks in.

Clean the roof

Cleaning the roof is a necessary operation, which can remove stagnant water, fallen leaves and other items that block the drain. Use safety ropes, supports and other equipment, and wear anti-slip and anti-fall equipment.

trap

After finding the leak, the leak can be repaired. When filling the leak, clean up the leak first, and then fill it with mud or cement mortar. At the same time, we should pay attention to smooth construction and good sealing. If the leakage is large or serious, it needs to be repaired or replaced first.

Step 4: Apply waterproof coating on the roof.

Brushing roofing waterproof coating is an effective way to prevent water leakage. After the roof is cleaned, use a brush or sprayer to evenly coat the waterproof coating on the whole roof surface. It should be noted that the quality of waterproof coating and construction quality will affect the effect.

5. Replace roofing materials

If the water leakage is too large or the repair effect is not good, it is recommended to replace the roof material. You can choose iron tiles or other materials with good quality and long service life, and you need to hire a professional construction team to replace them.

To sum up, it takes some skills and experience to deal with the leakage of iron tiles in old houses. It is recommended to find a professional construction team to help. At the same time, it is also necessary to clean the roof regularly, check whether there are potential problems on the roof and deal with them in time.