When installing the partition, put two newspapers behind the partition to avoid the friction between the white wall and the partition and make the wall blossom.
There are hooks on the back. First, use an electric drill to drive the expansion screw into the wall, leaving the hanging position of the hanging buckle, not too long, so that the force is better, and the combination of the cabinet and the wall is more intimate and beautiful.
The specific method is as follows:
How to solve the load-bearing problem by installing shelves on the wall
It is suggested to fix the partition with a support frame and solve the bearing problem of the partition at the same time.
Hardware products similar to the figure below.
(It is not recommended to slot the wall horizontally, and embed the partition into the wall. This will affect the structural safety of the wall. )
How to install a shelf on the wall of a straight shelf
The shelves on the wall are widely used and powerful, and are very popular with the public. Installing shelves on the wall can save space, so how to install shelves on the wall has become the most concerned issue. Let me answer your questions about how to install shelves on the wall and the precautions for installing shelves on the wall. Installation principle of wall frame 1( 1) The installation of wall frame should follow the principle of convenience and practicality. When installing shelves, we must consider the overall layout and daily habits, such as installing wall shelves in the kitchen and considering installing wall shelves in places where cooking is easy to get. 2(2) The principle of saving space should be followed when installing shelves on the wall. Kitchen and bathroom are relatively small places in our home, so the installation of shelves must save space and make rational use of our space. 3(3) Shelves installed on the wall should be clearly classified. There are many kinds of shelves on the wall. Install shelves with different functions in different positions in the home, so that they can "do their jobs" and make the home life orderly. Installation method of the shelf on the wall 1( 1) First measure the position to be fixed and mark it with a pencil; 2(2) Drill holes with an electric drill and fix the shelf with screws and expansion nails.
How is the partition on the wall installed?
One is supported by angle frames.
The second is embedded practice.
The third is the backboard fixing method.
How to install partition shelf on the wall
It needs to be measured with a level and then punched in the wall. It's also a technical job. If the requirements are high, it is best to ask someone who specially installs curtains and hangers to install them. View original post >>
How to install shelves
How to install shelves:
.
Just fix the shelf bracket on the wall with expansion screws, and then fix the shelf on the bracket with screws, and the shelf will be installed.
.
Illustration: How is wall frame installed?
.
club.qingdaonews/..._0
.
Installation method of shelf
.
wenku.baidu/...6QPvke
Installation of partition wall needs to be perforated. What kind of electric drill do you want?
It seems that the landlord's hands-on ability is not very strong at ordinary times, and it is of little use to buy an electric drill It is suggested to buy some large cement gongs, preferably nails, 1 a few cents, and some self-tapping wood screws (tell the shopkeeper the thickness of the board). Go home and find some tin cans and cut them into strips. First nail the iron sheet on the wall, and then screw the partition on the iron sheet with self-tapping wood screws, as long as the partition is ok.
How to install wooden lattice on the wall
The question is not comprehensive enough, and several questions are not clear: how much is selected for this partition? What kind of things to put (the weight often depends on the installation form of this partition).
Look at the thickness of your board (40). It is estimated that things will not be light. But don't expose the shelf.
Want to look clean and tidy, only partition against the wall, only one process is feasible:
It is also very important to use 16 yuan steel (threads are also acceptable) to drill holes in the 40-plate (the aperture should be corresponding, not loose), and then drill holes in the wall. Then put them in steel bars and install them against the wall. Note: this structure can be used to place general household items. Do not place heavy metal objects.
If something is heavy, it is suggested to add a finished metal bracket below. Not ugly either.
How to repair a word partition in home decoration? In other words, how to construct a word partition?
Make two holes in the wall, put the expansion screws in, and then hang the birch solid wood shelf. There are detailed operation pictures in my space photo album.
How to fix the partition on the wall
There are several ways you can try. One is fixed in a triangle at the bottom, that is, supporting a tripod. Drag the panel to fix it on the wall.
The second thing is that there is a fixing clip in the partition, which is fixed to the wall with screws first, and then the partition is fixed to the clip. There is also glue to fix things of different shapes (not commonly used).