When the cooker is working, press the timer up and down adjustment key to start the timer timing function.
You can choose to use or not use the timer function of the cooker according to your needs, and not using the timer function will not affect the working state (combustion state) of the cooker; When the timer function is used, the electromagnetic valve of the cooker is controlled, and the controller will automatically close the electromagnetic valve within the last 10 second of the countdown of the set time, so as to cut off the gas input to the cooker, without the independent timer control function of simultaneous combustion of multiple cookers.
Press the up adjustment key or the down adjustment key to set the timing time. The setting range of the timing time is 1 minute to 9 hours and 59 minutes.
Every time you press the up or down adjustment key, the number will increase or decrease1; (For example, if you need to set the timer time to 10 minute, you need to press the up-adjustment key 9 times. ) When you press the up key or the down key for more than 1 sec and don't let go, the number will increase or decrease rapidly in units of 1. (Note: The maximum adjustment value of the upper adjustment key is 9 hours and 59 minutes, and the minimum adjustment value of the lower adjustment key is 1 minute)
When the required time value is set, the timer will automatically enter the countdown operation state after 3 seconds. When the timer runs to the last 10 second, the controller will automatically turn off the solenoid valve, and the timer buzzer will sound "beep, beep …". In order to prompt the end of the timer, all the switch knobs are required to be in the "off" position, otherwise the "beep, beep …" timer buzzer will continue to sound.
If you want to cancel the timing function during the timing, just press the upper adjustment key and the lower adjustment key at the same time to turn off the timer.
Every time you press the key, the blue backlight of the timer will automatically light up. If there is no key operation after the light source is turned on, the timer will automatically turn off the blue backlight after 10 seconds.