What to do if the screw threads slip? Teach you a few tricks to deal with it!

In daily life, we often encounter the problem that the screws cannot be screwed out. Now we will sort it out for everyone. A few pretty good ways to deal with it.

Method 1: Pad method

Put something on the screwdriver head that can increase friction, such as double-sided tape, non-woven fabric, etc., to make screwing easier. Lemon moves.

You can also use rubber bands

Method 2: Glue method

The glue method is to inject 502 glue into the screw hole, and use needle-nose pliers after the glue solidifies. Unscrew the screw. Remember not to use a screwdriver to avoid slipping the teeth again. This method still requires a certain degree of care and patience, because you still have to wait for the glue to completely harden.

Method 3: Firing method

You can burn the head of the screwdriver red on the fire, then quickly press it on the head of the screw, wait for about 5 seconds, and it can usually be screwed. came out.

Method 4: Knife engraving method

Some netizens reported that they tried to use a knife to score the cross on the head of the screw. Only one of the characters "1" was carved, which was about 100%. In 10 minutes, you can unscrew it with a screwdriver.