Point the long side of the rectangle at yourself. If there is a painted face, there is a painted face down. Fold the rectangle up and down, leaving a long center line.
Fold the top edge to the center line and open the line 1/4. Then align the lower right corner with the upper side, press out the upper half of the bisector in the upper right corner, open it, and you can see the intersection of the bisector and the center line. After the intersection, the right half will fold to the left.
Align the upper right corner with the line 1/4, fold the lower right corner with the line 1/4, and open it.
Fold down the top 1/4, and pull the upper edge crease of the small rectangle to the right to get this figure.
Fold the middle long part of the small rectangle upward, align the lower oblique crease with the center line and flatten it.
Keep the lower crease, pull out the right angle under the edge of the upper half, flatten it, then press the raised part in the middle under the strip and turn the strip down to the back.
Turn one side, align the right side of the rectangle with the left crease, align the lower right corner with the midline crease, fold the right half to the left along the vertical edge of the folding triangle, leave a crease, and open it to make the left and right sides form a rectangular part. Make storage boxes out of empty cartons
Preparation materials: all kinds of empty cartons (such as cans, moon cakes, biscuit boxes, toothpaste boxes, etc. ), patterned wrapping paper, English newspaper, cardboard (used to increase the thickness inside).
A. The storage box made of tissue boxes is just the right size for storing old tapes and other sundries.
B, long toothpaste box, packed in English newspaper, can be used as a pen box with an inner box. Sewing buttons and sealing lines at the opening is a good sealing method.
C, add two drawers to a rectangular paper box, and use a long box of cosmetics as the inner box to make a jewelry box, which can hold earrings, necklaces and other small ornaments.
D, three empty aluminum foil bags, cut open the box mouth, clean them, dry them, and stick them together, which can be placed on the desktop as a stationery box.
The unique jewelry box is handmade.
The unique jewelry box looks very creative and exquisite. Its predecessor is just a finished milk box!
Preparation materials: small milk box, beautiful wrapping paper, a small piece of paper rattan, pearl board, corrugated board.
1, cut the milk bottle mouth, and fold the four sides of the milk box into the above shape under pressure.
2. Cut the favorite wrapping paper into long strips and stick them on both sides.
3. Draw the size of the box mouth and cut out a square box.
The box cover is lined with the thickness of a pearl plate.
Empty cans of potato chips are used as storage cans and multi-purpose pen holders.
Materials needed to make this pen container: empty cans of potato chips and colored wrapping paper.
A, the upper part with plastic cover, sealed at the bottom and decorated, is an elegant storage tank.
B, the lower part was originally a complete cylindrical jar, which only needs to be packaged, that is, it became a pen container.
Handmade vertical shelves
Keep the original shape of the milk cartons and pile them into a vertical shelf.
Materials required for diy production:
4 long milk cartons, wrapping paper and photo glue.
1. First, remove the bottom of the milk carton as the basic part of the shelf.
2. Cut the milk carton obliquely and fold it into a triangle, as shown in the figure.
3. The triangle of the finished product is used as the base of the shelf, which can make the whole body slightly inclined upwards, which is convenient for storing articles and does not scatter.
4. After the base and the three basic shapes are packaged, they are stacked and glued one by one, and you are done.
The production of creative cd stands has a natural, rough and original taste.
Materials to be prepared for making this creative work:
Corrugated cardboard (if the thickness is not enough, you can use two layers or add a layer of cardboard to increase the firmness) and branches of waste paper boxes.
Manual production method:
Cut the corrugated cardboard with a width of about 37.5px on both sides at equal intervals, then insert branches to adjust the angle, and the cd rack can be completed.
Insert the CD horizontally into the incisions on both sides, with the album name facing outwards, which is convenient for finding.
Handmade bookshelf
Using these abandoned empty cartons and cartons to make a unique and practical manual book and newspaper rack looks good!
Handmade materials to be prepared:
Cartons or cartons (about the size of magazines, books and newspapers), calendars and English newspapers (for packaging)
1, cut out a simple and generous shape, and paste it in English newspaper packaging, which is a practical book and newspaper rack full of scholarly atmosphere.
2. On the diagonal of the carton, cut it into fan-shaped arcs, add recycled paper materials such as calendar paper, and decorate it slightly, and a durable and environmentally-friendly book and newspaper folder is completed.
Hand-made colorful and childlike animal storage boxes and lockers.
Materials needed to make this storage box: discarded cartons and decorative paper.
1, original waste paper box, preferably rectangular and thicker.
2. Cut the paper box into a trapezoid as the basic structure of the lion.
Add the lion's face, cut and paste it with paper, and outline the shape of the lion, and you can complete the work.
What the box looks like when it is opened.
You can also design a favorite animal model and create a lovely animal storage box.
Manufacturing method of environment-friendly gift box
The following is a very economical and environmentally friendly gift box.
Preparation materials:
Milk carton (long or small), wrapping paper, glue (or double-sided tape).
1. After removing the bottle mouth as shown in the line draft, draw a dotted line on the milk box.
2. Use a ruler to assist the blade and gently draw a crease on the broken line.
3, according to the original cut crease, pinch off the slope.
4. After folding the four oblique angles, fix them by rotating.
5. Spread the paper with your fingers and sort out the shape of the petals.
6. The folded shape is as shown in the figure, but it has not been completed until now. The purpose is just to fix the crease first, so that the shape is easy to fold after packaging and the shell will not wrinkle.
7. Unfold the original folded shape, stick it on the surface with wrapping paper, and reserve about 100px up and down.
8. Cut the opening into four pieces and fold it flat.
9. Fold the base paper according to the general way of gift box packaging, and then fold it again according to the original folding method, and you can fold the beautiful gift box.