Tools: front silk, main thread, scissors.
1. Fold the front lead in half, knead it into a circle with your thumb and forefinger, and reserve the thread end for 20-30cm.
2. Pull out a section of the main line, and pass the thread end of the main line through the coil of the auxiliary line, leaving the thread end for 20-30cm.
3. Find the thread end of the main line, and wrap the thread end around the front conductor from top to bottom or from bottom to top for about 10 turn to the left.
4. The head of the main line turns left around the front conductor 10, and then turns right about 10.
5. After winding the main thread around 10 turn, thread the main thread through the front coil and slowly tighten it to both sides. Pay attention to tighten slowly, not too hard, otherwise it will easily damage the thread.
6. The thread end of the main thread wraps around the main thread from top to bottom or from bottom to top, and then wraps the thread end around the coil twice and tightens it, thus weaving three times. This is to fix the knot woven in front.
7. Finally, cut off the thread ends of the main thread and the front thread. Don't leave a thread. Try to cut them short and flat.