But there are many cheap and easy ways to make a bar of soap, which is interesting and reassuring ~

Here are some specific methods:

A, hot melt method to make soap method is as follows:

To prepare soap fragments or soap blocks, you can choose commercially available soap or homemade soap.

2. Put the soap blocks or slices into the pot, add appropriate amount of boiling water, and heat and stir with low fire until the soap is completely dissolved.

3. Add your favorite pigments and spices into the soap solution and stir well.

4. Prepare the mold, which can be made of silica gel or other available molds.

5. Pour the soap solution into the mold and let it stand for several hours, waiting for the soap to solidify.

6. Take the solidified soap out of the mold and dry it for a few days, waiting for the soap to mature.

It should be noted that safety should be paid attention to when making soap by hot melt method. Both hot water and soap are scalding and irritating, so protective measures such as gloves and goggles should be worn to avoid hurting skin and eyes.

Second, it is easier to make soap by cold method than by hot method. Here are the steps to make soap:

Ingredients: 500g olive oil 250g coconut oil 250g palm oil150g soda ash 350ml water 30ml essential oil (optional).

Tools: Warm gloves, range hood, agitator, short handle mixing spoon, waterproof heating pot, soap mold.

Steps:

1. Add olive oil, coconut oil and palm oil into a waterproof heating pot and heat until the oil melts.

2. Add soda ash into water and stir until soda ash is completely dissolved.

3. Slowly pour soda water into the heated oil and mix it evenly with a blender.

4. Continue stirring until the mixture thickens.

5. Add the essential oil and continue to stir evenly.

6. Pour the mixture into the soap mold and leave it for 24 hours to allow the soap to solidify.

7. Take out the solidified soap and cut it into the required size with a knife.

Precautions:

1. When making soap, be sure to wear heat-sensitive gloves to avoid contact with soda ash and hot oil.

2. When adding soda water, pour it slowly to avoid spilling.

3. When mixing the mixture, keep the range hood open to avoid harmful gas.

4. When cutting solidified soap, use a sharp knife to avoid damaging the soap mold.

3. Making soap by dissolving reverse molding is a simple and easy method, which is suitable for beginners or people who need to make soap quickly. Here's how to make it:

Material: soap base? Required color and fragrance model for hot bath.

Steps:

Cut the soap base into small pieces and put it in a heat-resistant container.

2. Put the container in a hot water bath, heat and dissolve the soap base, and stir evenly.

3. Add the required color and fragrance and continue to stir evenly.

4. Pour the dissolved soap into the mold and let it cool and solidify naturally.

5. Take out the solidified soap and cut or decorate it as needed.

It should be noted that in the process of making soap, you need to pay attention to safety measures, such as wearing gloves and goggles. In addition, different types of soap bases can be selected as required, such as transparent, white, milky white and so on. , to achieve different results.