1, wiring on the spinning wheel. Open the coil on the fishing boat, put the fishing line on the fishing boat with your left hand, and wind it clockwise for 5 to 6 times along the axle groove with your right hand. It would be better to cross it a few times more. The purpose of this winding method is to make the fishing line lock the axle tightly.

2. Fix the thread. Turn the thread end of the left hand around the main line clamped by the right hand for 3 or 4 times, tie the thread end tightly with a horse cage knot, and cut the thread end with scissors to firmly fix the fishing line on the wheel shaft.

3. Go online. Pull back the coil on the fishing wheel, shake the fishing line clockwise, shake the fishing line into the spool with uniform soil force, and finally press the thread end on the metal post.

Fishing line installation is the same, mainly depends on what knot to tie and fix it on the line cup.

First, you need to make a ring at one end of the fishing line, then open the line cup, put the ring in, tighten it, close the line cup, and you can shake the handle and slowly close the line.

In the winding process, it is best to press the wire by hand, so that the winding can be more compact. It takes about 8 -9 minutes to wind the wire, otherwise it is easy to blow the wire.