First kind

1, tie one of the colored ropes; Press the left side of the yellow rope on top of the red rope.

2. Pull down the other end of the yellow rope and press it on this end of the yellow rope; Pass this yellow rope under the red rope.

3. Hold both ends of the yellow rope and tighten it; The yellow rope is pressed on the red rope; Grab both ends of the yellow rope and tighten it.

4. Repeat the steps from the left side of the yellow rope; Pull down the yellow rope on the right and press it on the yellow rope.

5. Put the pulled yellow rope through the ring and hold the two ends of the yellow rope tightly to complete the specific operation of bracelet weaving.

The second type

1. Prepare colored rope A first, and decide the color by yourself. Tie the rope in half and lay it flat on the table.

2. Prepare another colored rope B and put it under the knotted colored rope.

The next thing to do is to start knitting. Rope B is twisted and crossed on rope A, and two ropes are twisted and knotted.

4. Repeat the above steps and continue winding and knotting.

5, you can also prepare pendants such as small bells, and you can insert them when you are almost woven. Weave it to the right length and tie it. Pay attention to tie a retractable knot, so that you can adjust the size at any time and wear it easily, and you will weave a beautiful bracelet.

Precautions for wearing bracelets

1, don't wear jewelry when taking a shower and washing your hair, or during heavy physical labor or sports activities, so as not to be damaged.

2. Do not touch corrosive chemicals such as strong acid and alkali to prevent deterioration and affect luster.