When installing, try not to knock against hard objects, and do not leave cement, glue, etc. So as not to damage the luster of the surface coating.

Pay attention to remove the sundries in the pipeline and install the faucet.

2. When the water pressure is not lower than 0.02mpa (i.e. 0.2kgf/cm2), after a period of use, if it is found that the water output is reduced or even the water heater is turned off, you can gently unscrew the filter screen cover at the faucet outlet to remove impurities, which can generally be recovered.

Don't turn the faucet too hard, just turn it gently.

Even the traditional faucet can be screwed to death without much effort.

In particular, do not support or use the handle as an armrest.

4. The metal hose of the bathtub faucet shower head should be stretched naturally, and it should not be coiled on the faucet when not in use.

At the same time, whether it is used or not, be careful not to form a dead angle at the joint between the hose and the valve body, so as to avoid the hose being broken or damaged.