You need to bring your own WIN10 installation disk (USB flash drive).

Reboot, when the boot logo appears to continuously click ESC to select the startup item can be (different product lines, the entry shortcut key for the startup item is different, ASUS laptop is to press ESC, desktop or motherboard is to press F8)

Windows 10 is the same as Windows 8, support UEFI or non-UEFI mode boot (Windows 7 does not support UEFI boot)

We recommend choosing UEFI boot mode for this installation of Windows 10, so that the subsequent partition format is the more advanced GPT format, if you choose non-UEFI boot mode (the fourth item in the figure below), the subsequent partition format is MBR, and up to four primary partitions are created

Installation

Boot the system

Select the boot item in the boot section After selecting the USB flash drive, the boot image will start

Select the language, keyboard and other settings, and then select "Next"

Click on "Install Now"

The installer is starting

At the stage of verifying the secret key, if you have one, you can enter it directly.

Agree to the license terms

Select "Customize"

The next step is partitioning, Windows 7 requires you to click "Drive Options (Advanced)"

The installation program is now starting. "

Click New to allocate the size of the C drive, here 1GB = 1024M, according to the needs of the allocation of size

If you need to allocate the C drive for 100GB, it will be 100 x 1024 = 102400, in order to prevent it from turning into 99.9GB, you can add an additional 5-10MB

Here to divide the 127GB The hard disk is divided into a partition, click New and then click Apply

Windows will automatically create a boot partition, here select OK

After the creation of the C disk, in which the system retains the disk will be automatically generated, don't worry about it. After the system is done, this partition will be hidden automatically. Next, select the path where the C system will be installed, and click Next

If you have a lot of zones, don't choose the wrong path to install

We are copying the files and preparing the files, and most of the next stages are done automatically

The following picture shows that all the steps are done automatically, and then it will be rebooted

Windows will be rebooted automatically. Windows will restart automatically, you can unplug the flash drive at this time

After restarting Windows will still load the process automatically. It will reboot several times during this period and is preparing for setup

When it's ready, it will reboot, and then it's time to verify the product's secret key, which you can either enter directly, or choose to do so later

The quick-start interface, just choose to use the Quick Setup option

Wait for a few moments

At this point, the system is almost complete, and you will need to create an account and a password for the machine. Create an account and password for this computer, leaving the password blank means that no password has been set

Next, Windows this setup application, waiting for the final configuration is ready

Windows installation is complete, please enjoy it

Automatically jump to the desktop