1. Choose a place with sufficient water, introduce the frog after cleaning the pond, do a good job of hatching, feed it reasonably during the growth period, control the water quality, and take measures such as disease prevention.

2. Site selection: The frog breeding site should be located in a place with high terrain, sufficient water and no pollution. Ensure that the water source is sufficient and easy to change. The water does not contain toxic and harmful substances such as ammonia nitrogen, nitrite and heavy metals, and the ph value of the water source and pool water should be 6.5-8.5.

3. Clean the pond. If it is an old pond, remove the dirt from the bottom of the pond, and then clean the pond with quicklime (15-2 kg/mu) or bleaching powder (6 kg/mu). If it is a new pond, clean the pond directly by the above method. Then check whether the ph value is normal. If the Ph value is low, you can sprinkle a proper amount of quicklime to adjust the ph value; The ph value is on the high side. Change the water several times until the ph value is normal.

4. Detoxification: After the Ph value is normal, spray Baile (5-8 mu/bottle) on the whole pond to detoxify

5. When entering the water, pay special attention to putting a dense net at the water inlet to prevent the larvae of harmful organisms from entering the culture pond.

6. Breeding frogs: Choose healthy, large and high-quality parents, and don't choose breeding frogs in sick ponds. The pond where frogs lay eggs should be disinfected regularly, once a week with Xianglian solution (1ppm). The water in the spawning pond should be kept clean to avoid the death of fertilized eggs due to lack of oxygen caused by mud and moss.

7. Incubation, the incubator should be built in a place with high terrain, sufficient water and no pollution. The water does not contain ammonia nitrogen, nitrite, heavy metals and other toxic and harmful substances, and the ph value of the pool water should be between 6.5 and 8.5. Incubation ponds should be disinfected regularly, and fragrant lotus solution (1ppm) or Haoyijie (1ppm) should be sprayed on the whole pond once a day. The water in the incubator should maintain a certain fluidity to ensure that the dissolved oxygen in the water is sufficient. The fertilized eggs in the pool should be scattered as far as possible to avoid the death of fertilized eggs due to lack of oxygen. In case of bad weather, granular oxygen can be thrown when there is no oxygen in the pool.

8, 4, tadpole breeding, fertilizing water, fertilizing water before releasing tadpoles. Fertilizer water can use Baile (5 mu/bottle)+fertilizer. Regularly transfer water to Baile+Polybiotics or Herbal Probiotics for alternate use, once every 7-1 days. .5g of stilbene+2.5ml of phloroglucin+5ml of polyoxin+5g of multivitamin, once every half month, and fed continuously for 5 days each time. Disinfect regularly, and sprinkle the whole pool with fragrant lotus solution (1ppm) every 5-7 days. Anti-stress: Sprinkle hormone (.2ppm) in the whole pool before and after the weather changes

9. Cultivate adult frogs and disinfect regularly: spray the whole pool with Xianglian solution (1ppm) every 7-1 days. Feed .5 g of stilbene+2.5 g of phloretin+5 g of multivitamin+5 ml of polyoxin per kilogram of feed regularly, once every half month, and feed continuously for 5 days each time. Feed the feed reasonably: it is better to eat the feed in 4-6 minutes, and it is advisable to eat a small amount for many times, otherwise gastrointestinal diseases will easily occur. High temperature heatstroke prevention and stress resistance. When the temperature is above 37 degrees, 2.5 grams of hormone should be mixed with each kilogram of feed and fed once a day. Change water frequently: when the water quality becomes worse, change the pool water in time to avoid the harm of harmful substances to frogs.