Three colors of cardboard
scissors
scissors
pencil
glue
fancy paper
scotch tape
untrue
Methods/steps
1 Draw a long box on the cardboard as the main body of the dragon boat. The hull of a dragon boat can be represented by a long box. Here, a long box is drawn on the cardboard as the main body of the dragon boat.
After drawing the edge line of the long box, cut the edge of the box along the line with scissors, and pay attention to keeping it neat.
3. After cutting the outline edge of the three-dimensional box, fold it according to the drawn lines to fold the three-dimensional box.
Then stick the folded boxes on both sides with transparent glue and fix them, and the outline of the hull will be roughly drawn.
After a piece of colored paper is folded in half, draw the image of the faucet on the paper with a pencil. Then hold the folded paper tightly and cut out the figures with scissors, so that the figures of two faucets can be cut out at the same time.
After folding a piece of colored paper in half, draw the image of the dragon tail on the paper with a pencil. Then hold the folded paper tightly and cut out the graphics with scissors, so that two dragon tail graphics can be cut out at the same time.
7 Take out the brightly colored cardboard, and then draw the dragon horn, dragon beard and other figures in different colors on the cardboard, and cut them out along the line, as shown in the figure below.
Then draw dragon boat decorative graphics, boating and other graphics on cardboard with different colors, and cut them along the line.
Then divide the cut figures into two groups, because the dragon boat has two sides, and stick them on the box in two groups, which will have a three-dimensional effect and be more vivid.
10 Then, a group of figures representing various parts of the dragon boat were glued together according to the image of the dragon boat.
1 1 Then paste the graphics of each part of the dragon boat on the box. The dragon head should be attached to the box, the dragon tail should be assembled behind the box, and the decorative drawings and paddles should be directly attached to the box. Pay attention to the color matching of the decorative graphics.
12 Only one side of the dragon boat is burnt, and the paper jam will shake a little. Then paste a set of graphics on the other side of the dragon boat to increase the three-dimensional sense, as shown below. In this way, a complete hand-made dragon boat image will be done.
Matters needing attention
Note that children should be accompanied by adults to make them by hand to avoid injury.