Debugging according to the specific situation, the ice cream machine has ten gears from 1- 10 * *. According to the soft hardness of the ice cream, the hardness setting can be adjusted accordingly: if the ice cream is soft, the hardness value will be raised upwards; If it is too hard, the hardness value can be reduced.

For example, when the hardness value is set to 3, the produced ice cream is soft, so the hardness value can be adjusted upward to 5. Then, after the ice cream machine stops cooling, you can make an ice cream to see if the hardness value is appropriate. If it is still soft, it can be adjusted upwards until it is suitable.

Matters needing attention when using ice cream machine

1, the ice cream machine has just been shipped back to the store, and it will not be used until 24 hours later.

2. The general commercial ice cream machine can put two flavors of ice cream syrup, so it is necessary to use two cylinders instead of a single cylinder.

The ice cream machine must be installed or placed in a place with good heat dissipation and ventilation.

4. In terms of electricity consumption, the working voltage should be consistent with the voltage on the nameplate of the ice cream machine. In addition, be sure to remember the grounding wire. Most brands of ice cream machines are made of stainless steel, so you must be grounded properly.