Illustration of the most accurate method of adjusting four to catch two:
Step one: find the bottom with lead drop
Add lead skin, and the gravity should be slightly higher than that of the float The buoyancy of the float should be a little medium, and then thrown into the water, while constantly adjusting the length of the waterline (the line between the float and the figure 8 ring). If the float cannot be seen when it is submerged in the water, it means that the waterline is short, and the float should be moved to Stroke up until the float can emerge from the water.
Step 2: Move the float down
Sweep the float down two float lengths (30-50 cm) to ensure that the hook can leave during the float adjustment process. end.
Step 3: Cut the lead and adjust the mesh
Use scissors to cut off the excess lead. Note that you can cut more at the beginning, and when the float slows down, you can I started to cut the lead sheet bit by bit to prevent over cutting. Cut until the float is exposed when the double hooks leave the bottom. The mesh number is 4 meshes. In this way, the adjustment is complete.
Step 4: Hang bait to find the bottom
Hang a normal-sized bait on the hook. At this time, the float will sink in the water due to the heavy object.
Step 5: Move the float upward
After the bait floats and sinks to the bottom, the waterline should be lengthened, that is, the float should be stroked upward. Repeat this several times, one by one. Adjust the point upward until the double hooks touch the bottom and the float is exposed by 2 meshes. This is fishing for 2 mesh.
Adjusting four and catching two is the basic skill of Taiwan fishing drift adjustment, which can also be said to be the basis of drift adjustment theory. If you understand the true meaning of adjusting four and catch two, you will be proficient in various drift adjustment methods.