How to use leaves to do small animals

With leaves to do small animals as follows:

Butterflies

1. First take a few leaves yellowed green ginkgo leaves, cut off the leaf stalks, and then two pieces of basically the same size of ginkgo leaves glued together as the butterfly's wings, and then paste the body and antennae.

2. With the same method and then stick out two beautiful butterflies, and finally at the bottom of the other leaves as plant decoration, simple leaf stickers on the done.

Fox

1. First use the red leaves as the fox's body, and then paste the brown sycamore leaves as the head.

2. Use two thin green leaves as the fox pointed ears, and then paste the red tail, with two palm-shaped leaves as hands, complementary legs, and finally glued eyes, painted expression, simple leaf stickers are done.

Hedgehog

1. Draw a small hedgehog's head on the paper, and then a piece of brownish-yellow leaves to stick out the body of the hedgehog.

2. The bottom of the leaves can be properly trimmed with scissors, and finally the eyes with a black pen to describe some of the larger, simple leaf stickers are done.

Bear

1. First take two yellow leaves, with scissors to the edge of the leaves properly trimmed into an oval, pasted on the paper as a bear's body, and then cut out the round head.

2. Continue to stick on the legs, painted hands, and finally cut out the shape of the nose with white paper, pasted on the face, painted ears, eyes and other five senses, simple leaf stickers are done.

Parrot

1. First draw the basic outline of the parrot on the paper, and then take some green acanthus leaves glued to the wing position, continue to use some small green maple leaves into the parrot's abdomen head feathers.

2. Next, use the leaves to cut out the bird's crown and beak, and finally draw a branch, paste some leaves, simple leaf stickers are done.

Dragonfly

1. First, use a pencil to draw the outline of the body of the dragonfly on the paper, and then use a black marker to describe the pattern clearly, draw the body of the limbs and black eyes, continue to use black colored pencils to the body of the dragonfly to describe the thick.

2. Finally, take four long thin leaves, glued to the body on both sides, as the wings of the dragonfly, simple leaf stickers are done.

Lion

1. First in the color paper to draw the outline of the lion's face, supplement the expression of the five senses, painted colors, and then take three ginkgo leaves into a lion's head, stick the face on it, and then a large leaf glued into the lion's body.

2. With the leaf handle and small leaves into a tail, and finally to the lion on the limbs, simple leaf stickers are done.

Rooster

1. First use two leaves to paste the neck and body of the rooster, and then take two leaves of the five-pointed maple glued to the tail position, made of beautiful rooster tail.

2. Next, cut out the red leaves as the crown, supplemented by yellow beak and plume, and then take the yellow paper to cut out the eyes, and finally glued on the thin legs, painted claws, simple leaf stickers are done.

Small animals

1. First take four different sizes, colors, shapes of the leaves, one by one with glue on the paper.

2. Then stick them with small pieces of paper cut into the eyes, plus eyelashes, and then painted on the paper and limbs, tail, and finally supplemented by painting the wings, to the hedgehog with a small thorns, simple leaf stickers are done.

Ladybug

1. First take a brownish-yellow leaves, trimmed into the body of the ladybug, and then take two different sizes and colors of the leaves continue to trim into the body of the ladybug.

2. Then the three ladybugs painted on the seven black spots, mouth, and antennae and legs, and finally add some decorations, simple seven-star ladybug leaf stickers are done.

Bird

1. First take three red leaves on the paper as the body of the bird, and then the yellow leaves for appropriate trimming glued to the body as wings.

2. Stick a round piece of paper as the eyes, painted mouth, eyes and claws, and finally cut the grass to stick at the bottom of the grass, simple leaf stickers are done.

Handmade leaf sticker pictures

Handmade leaf sticker pictures are as follows:

1, leaf sticker of the African green parrot

Its eyes can be pasted on with colored paper can be used, and claws can be used directly with pens or vines and twigs to replace.

2, leaf stickers of the red nose of the cat

It is recommended to use colored paper as its nose, beard, eye makeup. If you want to finish it quickly, you can also use a pen to draw the five senses.

3, leaf stickers of autumn leaves under the dancers

The picture at the bottom of the picture is the little prince, a little complicated. Need to use a pencil to draw the general shape, then use scissors to trim out, and finally the color is completed.

4, leaf stickers full of leaves of the hedgehog

White lines on the leaves can choose to use watercolor or acrylic paint.

5, leaf stickers of the zoo animals carnival

You can directly zoom in on this picture, a simple pencil tracing out its general shape, and then their own leaves to paste.

6, leaf stickers of the fall fairy tale

Directly take the red maple leaves as kindling, it is really unexpected apt.

7, leaf stickers of the happy Alice's Adventures in Wonderland

The picture of the lion, coral fish head are colored cardboard, and then paste the leaves, there is a novel shape.

8, leaf stickers of sun chrysanthemum

Shape is prominent, with the type of leaves also bold.

9, leaf stickers of Merry Christmas

If there is no way to buy a Christmas tree home, paste the Christmas tree with leaves out, but also a sense of holiday rituals.

10, leaf stickers of the red goldfish baby

And the goldfish's eyes look like the use of flower petals to paste out.

How to DIY make small animals with leaves method illustration

I. How to make leaf stickers:

First of all, it is the collection of leaves

1. The collection of leaves should be considered first for the variation of their shapes. Such as maple leaves in the shape of a diamond, round birch leaves, long gripped leaves and oval Huzhizi leaves, etc., should be collected to ensure the diversity of the pattern structure.

2. The collection of leaves should also consider the diversity of colors.

3. The collection of leaves should be series, that is, each shape and color of the leaves can form a progressive sequence from small to large one by one. This will ensure that the production of a full range of options. It is also important to collect some flower leaves, seeds and stalks.

Fresh leaves tend to wilt, so if you want to make stickers with leaves, it's best to put them in a book and wait until they are half-dried, or dry, before making them. This way there is no wilting phenomenon.

So, while collecting leaves, carry a certain amount of blotting paper or napkins, or old books or magazines with rough paper if you have them. As you collect the leaves, flatten them out and place them in the blotting paper. When you bring them back, press them tightly with a heavy object and turn them over twice a day for about a week or so until they dry out, then put them in a sorting folder and use them.

Then the conceptualization of the juice picture, there are two design methods. One is to decide on a theme and then choose the material. For example, the giraffe in the book, in the first draft of the design, we should envision the shape of the leaves suitable for the giraffe's head, neck, body and other parts of the leaf, and then look for the basic shape of the appropriate leaves. Secondly, the theme should be based on the shape of the leaves that you have collected. For example, if the ginkgo biloba leaves look like a camel's hump, we can design a program to make a camel. Another example is the creation of the tail in "Goldfish", which is derived from the shape of a maple leaf. Using leaves of various colors and shapes and cutting them appropriately, the leaves are transformed into living critters.

Take a suitable piece of cardboard (drawing paper is also acceptable) and use a pencil to draw a draft of the conceptualized theme, paying attention to the balance of the layout, the size of the picture is reasonable.

Select the leaves corresponding to the theme, some can also be trimmed. Make use of the backs and petioles of the leaves according to the situation.

Place the leaves on the cardboard with glue or double-sided tape and flatten them. Paste the leaves from the far side of the picture, then the front, and pay attention to the order.

Finally, you do a good job of leaf painting to get flat, according to your idea of laying, fixed (with a little bit of glue, stick on the inactivity can be). Then press mold (like the production of ID cards). Since the cardboard is in a closed state, the leaves will keep for a long time. (You can get help from a copying company that makes business cards for the molding. (General will have)

If you do not want to beg, then we will be on their own soil on the horse it, you make a good leaf stickers into a suitable size of the plastic bag, the mouth rushed out to the edge of the table, the top of the pressure on the heavy book, the purpose is to exhaust the air inside, and then put a small saw blade to the mouth of the bag, to the excess edge of the mouth of the bag pressed to the saw blade with a lighted cigarette, gently along the edge of the blade, the side hot side, so that the leaf products can be preserved for a long time, the leaf products will be preserved for a long time, and then you will have to go to the copying society to seek help. Side of the hot side of the walk, so that the mouth of the bag sealed

Now, a picture of their own hand-made "masterpiece" was born, it can be used as a "handicraft" to give away, will never let people think that you did not spend money and "cheap", but because of the "handicraft". ", but because the money can not be bought and show your "talent", you'll be happy!

II. Leaf specimen production method:

(1) the pressing method to prepare a wooden specimen folder, pressing the specimen will be the first and last from time to time to switch positions. In order to promote the rapid drying of the specimen and preservation of the inherent color, about the second or third day after the press, you can change the hot straw paper one or two times a day. After the specimen is pressed, with a needle and thread mounted on a tough white paper, and in the lower right corner of the label, and then loaded into the specimen cabinet, and put some camphor in order to prevent insect infestation.

Methods of making leaf wax leaf specimens:

Instruments and supplies:

Instruments and supplies:

1, the collection of specimens: scissors;

2, finishing, flattening, drying utensils: blotting paper (tissue, towel can be), rope (bundling with);

3, cardboard (table paper), glue and so on.

The collection and production process of wax leaf specimens

1, collection

Requirements for representative and typical, complete leaves, no mutilation, no insect damage.

2, sorting

The collected leaf specimens are put on absorbent paper and sorted out, so that their branches and leaves are stretched out and kept in a natural state.

3, flattening, drying

This is the key link. In the specimen folder on each layer of several layers of absorbent paper, put a specimen, and then the specimen with specimen folder fixed, tightly tied with a rope, placed in a ventilated place. In order to accelerate the drying of the specimen, the paper should be changed in time every day to make it dry thoroughly.

4, mounting (on the table paper)

Mounting refers to the plant leaf specimens bound to a cardboard (table paper). The plant wax leaves fixed on the table paper in many ways, can be small strips of paper, tape, fine line or paste. When binding, make sure that the specimen is properly positioned so that no part of it is exposed and that it is glued directly on. Write the name of the specimen under the leaf. Finally, it can be overglued.

(2) immersion method will be immersed in the specimen bottle containing alcohol or formalin can be.

Transparent specimen production method

To make a translucent or transparent state of a plant organ, without having to undergo dissection, can be directly observed from the outside of the internal structure, such specimens are called transparent specimens. For example, the distribution of stems and leaves, the distribution of the transmission tissues, the shape and position of the androgynophore inside the flower buds, etc., if they are made into a transparent specimen, can be directly observed. The procedure of making transparent specimens can be divided into transparent, bleaching, dehydration, preservation and other steps.

Transparent

Generally use 8% potassium hydroxide liquid 1000 ml, 5% ammonia 1000 ml mixed up, take its clarified liquid soak plants. The soaking time varies according to plant species and organs. Generally not too thick leaves, soaking 12 hours is enough; like pine cones, thick organs, often need to soak for more than ten days. In any case, the material to be treated can be removed when it becomes translucent. In the immersion time, found that the immersion liquid turbidity, should be replaced with new liquid. After the specimen has been immersed, it should be rinsed with water for 30 minutes to thoroughly wash the liquid attached to the specimen.

Bleaching

Generally, 3% hydrogen peroxide is used for bleaching. Usually after 12 hours can bleach successfully. After bleaching, the material is rinsed with water.

Dehydration

Dehydration with alcohol. In order to avoid crumpling of the material, the concentration of alcohol should be from small to large, so that the material is gradually dehydrated. Generally, the alcohol is formulated into 30, 50, 70, 90, 95% of five concentrations, the material in each concentration of 10 hours of immersion. It should be noted that the dehydration should be sufficient, otherwise, the specimen is only white, not transparent.

Preservation

The preservation solution is usually xylene. Xylene in addition to long-term preservation of specimens, but also further make the specimen transparent. The specimen has been dehydrated, put into the specimen bottle containing xylene, seal the bottle, labeled, can be saved for later use.

Three. Leaf vein bookmark production method:

Leaf pulp will rot when encountering corrosive liquid. When heated, it will rot even faster. Leaf veins are tougher, not easy to be corroded. Therefore, you can make leaf vein bookmarks from some hard leaves and tough veins.

Tools and materials: beaker, tripod, asbestos mesh, alcohol lamp, matches, balance, old toothbrush, tweezers, watercolor paint, colored silk thread, sodium hydroxide, 3% hydrogen peroxide, cinnamon plant leaves.

Procedure:

1. Pour about 100 ml of water into a beaker, add 4 grams of sodium hydroxide to the water, rest the beaker on an asbestos mesh, heat it with an alcohol lamp and boil the solution.

2. Submerge the plant leaves in the solution, continue to heat for about 15 minutes, gently stirring with tweezers to separate the leaf flesh and corrode evenly.

3. When the leaves change color and the leaf flesh is crispy, take out the leaves with tweezers and put them in a glass filled with water.

4. Remove the leaf blade from the water, place it on the glass, and gently brush the front and back of the leaf blade with an old toothbrush under running water to remove the soft part of the leaf blade and expose the white leaf veins. Immerse the leaf vein pieces in 3% hydrogen peroxide for 24 hours to turn them pure white, then remove the leaves, wash them with water and drain off the water droplets.

5. The leaf vein pieces are put in an old book or old newspaper and pressed dry.

6. Take out the flattened leaf vein sheet, wait until the leaf vein is dry, use a brush to apply watercolor paint on both sides of the leaf vein, and then flatten it after it dries a little.

7. Take out the painted leaf veins, tie a colorful silk thread on its petiole, and you will get a delicate and beautiful leaf vein bookmark.

Instructions and extensions:

1, the production of leaf vein bookmarks can be used in addition to cinnamon plant leaves, but also can be used in coral plant leaves and so on.

2, heating, the beaker must rest on the asbestos mesh, such as direct heating, the beaker due to uneven heat will cause broken.

3, used liquid can be saved in the empty container, so that the next time to use, general liquid can be recycled 4 to 5 times.

4, such as processing too many leaves, can be replaced by a large beaker, water and sodium hydroxide should be 100:8 for the liquid.

Another practice:

Leaf vein bookmarks is to choose the beautiful leaf shape of the leaves, after chemical treatment to remove the leaf flesh part, to retain the intact

integrated leaf veins, after dyeing made of a bookmark. The production of leaf vein bookmarks can be used as a way to make money for laid-off workers and rural affluent

laborers.

Production method:

1, choose the leaves. Choose leaves with thick and dense veins. Generally, evergreen woody plants are good. Such as cinnamon

Flower leaves, heather leaves, papaya leaves, eucalyptus branch leaves, tea tree leaves and so on. Select leaves for making in late summer

or fall when the leaves are fully mature and beginning to age.

2, with lye cooking leaves. Lye configuration: 1 liter of water, sodium carbonate (baking soda) 70 grams, 50 grams of sodium hydroxide

(the above two drugs are available at the chemical store), can also be used in place of lime water lye, in the enamel cup or

casserole will be prepared lye boiled into the right amount of washed leaves, boiled and gently rattled leaves with chopsticks

, to prevent the leaves from stacking, so that their The heat will be evenly distributed. Boil the leaves for about 5 minutes, and when they turn black, remove one leaf

and put it into a plastic pot with fresh water. Check the corrosion of the leaf flesh and easy to peel off the situation, such as easy to separate the

leaf blade can be fished out, put into a plastic pot of water, and then one by one for the separation of the leaf flesh and leaf veins.

3. Remove the leaf pulp. After cooking the leaves on the palm of your hand or on a glass plate, with an old toothbrush handle smooth in the

leaf surface gently rubbed, corroded flesh can be wiped off, and then rinsed under the faucet, continue to rub

until all the leaf flesh removed.

4. Bleach the veins. Brush the clean leaf veins in a bleaching powder solution bleached out, rinsed with water

and then clamped in the old books and newspapers, after drying out, you can become a leaf vein bookmarks to use.

5, coloring, drawing, writing. With red and blue ink or other dye into your favorite color,

can also be painted on it, writing, and finally tied on the silk thread that is completed.