question 2: how to adjust and float the lead fishing method. 1. When there is no hook, the heavy lead will come to the bottom.
2, float down 2CM, cut the lead skin to level.
3. The space bean on the lead ball is opened 3 cm.
4. Hook, pull up the float until 2-6 meshes are exposed, which can be used for fishing, and more meshes are exposed when the current is sharp.
question 3: how to adjust the standard of the fishing trot lead fishing method? Ask how to adjust the spirit. Steps of adjusting and finding the mouth
1. Steps of adjusting and trying to fish crucian carp for leisure:
(1) Basic steps of adjusting and finding the bottom:
1. Rough bottom finding:
Heavy lead is hung on the lead skin seat, and the weight of the lead skin is greater than the buoyancy of the float. All the floats are submerged in the water, and the float is gradually pulled up to reveal one eye, and the top space bean is located. (At this time, you can hang or not hang the sub-line. )
2. Adjust the eye:
Hang up the sub-line and float down about 3 cm (remember the distance of float down > The length of the long string +1 cm), at this time, the float should be completely submerged in the water, and gradually cut the lead skin until the required mesh number is exposed (adjust the mesh).
3. Basic principles for setting the eye adjustment and fishing purpose of crucian carp fishing:
7-mesh soft tail floating and rubbing bait: 4-5 mesh for about 2 mesh
7-mesh soft tail floating and pulling bait: 2.5-4 mesh for about 2 mesh
Hard thin tail rubbing bait: 7-9 mesh for about 2-3 mesh
Hard thin tail pulling bait. Fishing low, fishing spirit.
according to the weather, season, specific gravity of bait, size of bait ball, fish mouth, and other factors, fine-tune and adjust the eyes:
4. Find the bottom accurately:
Move the float, adjust the distance between the position of the float seat and the position of the positioned upper space bean to be roughly equal to the length of the sub-line, hook and rub the bait ball to find the bottom (and also make a nest), so that the float emerges from the water. It means that the bottom has passed, and the float is pulled back 2 cm. This action is called reverse bottom finding, and then the bait ball with normal fishing size is hung and thrown into the water, and the float is fine-tuned until the fishing mesh is about 2 meshes for trial fishing.
5. Adjustment process of trial fishing
(1) There is no fish in the mouth: fishing is too clever, pull up the float for 2CM (it can be pulled up for less than 5 consecutive times), and fish in the upper lip for more than 2 consecutive times to find the right mouth. (Tailing can be understood as finding the bottom incorrectly, but still leaving the bottom)
(2) The middle fish is on the mouth or chin, which means that fishing is too dull. Pull down and float 1 cm at a time until the fish is in the upper lip for more than two times to find the right mouth. (Too dull can be understood as finding the bottom incorrectly, and it has passed the bottom)
(3) There is no mouth to catch the bottom: pull down the float 15cm at a time to find the water layer where the fish is located, which belongs to the category of fishing off the bottom-floating-fishing for one standard depth, and it is necessary to cut the lead again and adjust the float, so that after hanging the double bait, the float will be exposed for about 2 eyes, and the other is said.
(2) Lead-running fishing method:
1. Scope of application: it is used when running water or small miscellaneous fish are hooked, and the fishing method is similar to traditional fishing.
2. Lead running and bleaching steps
(1) When there is no hook, the heavy lead will come to the bottom.
(2) float down 2CM, and cut the lead skin until it is level.
(3) The upper space bean of the lead ball opens about 5 cm.
(4) hang the sub-line, and pull the float up until it exposes 2-6 meshes, which can be used for fishing. 3. Precautions for lead fishing
(1) In running water environment, the float should be as large as possible, with strong positioning ability, such as No.3 float of Dao Lang A118.
(2) The sub-line should be kept as short as possible within 1 cm, because lead fishing is extremely blunt, and short sub-line can amplify the signal.
(3) You should grasp the movements of going up and down, and you can both catch fish.
(4) The bait can be properly sticky.
2. Detailed steps for leisure fishing:
1. If the floating phase only rises slowly but there is no next bite, or if it rises only slowly and falls in the shade, it can be adjusted by pulling down until there is a slow rise, and then there is a slight fish.
2. The drift phase only rises slowly, but there is no downward drift, so it is ineffective to adjust the fishing eye by pulling down the drift, which is mostly related to the bait state and size. You can adjust the bait state and bait application method in time before asking and exploring.
3. If the drift phase only rises slowly, but there is no drop-down drift, it is ineffective to adjust the fishing eye, bait state and bait application method, so you can reduce the lead and find a new mouth until there is a flat mouth and fish are caught.
4. The drift can't fall to the set fishing goal, or the high top doesn't fall for a long time. After eliminating the factors such as inaccurate rod throwing and bait loss, it is mostly caused by the fish interface. You can also pull down the drift to adjust or reduce the lead to find the mouth.
5. There are many fish in the nest, but there is still no mouth after adjusting the fishing orders. We should check the hook attachment rate and atomization rate of the bait. At the same time, it should be checked whether the fishing is too dull, drifting and fishing, and whether the bait falls into the mud layer with virtual bottom that the fish mouth does not recognize.
6. The adjustment of the agility of the fishing eye is all without a mouth, and the adjustment of the bait state and the bait application method are also ineffective. We can reduce lead, increase the adjustment of the eye, improve the bait carrying capacity of the drift, and increase the adjustment of the fishing eye ... > >
question 4: how to adjust the drift of lead fishing? 1. in the state of no hook, heavy lead will come to the bottom.
2, float down 2CM, cut the lead skin to level.
3. The space bean on the lead ball is opened 3 cm.
4. Hook, pull up the float until 2-6 meshes are exposed, which can be used for fishing, and more meshes are exposed when the current is sharp.
Question 5: How to adjust the drift of fishing video How to adjust the drift of smooth-mouthed fish and how to catch smooth-mouthed fish, how to adjust the drift and the choice of fishing purpose:
1. Try to adjust the drift of smooth-mouthed fish as slowly as possible, and try from adjusting 2 eyes. If there are many false signals, you can adjust them to 1 mesh or level the water. Until the glitches decrease or disappear.
2. Try to catch the smooth-mouthed fish as slowly as possible, and try to catch 4 orders. If there are many false signals, it can be adjusted to catch 5-6 orders or higher. Until the glitches decrease or disappear.
3. If the false signal can't be effectively eliminated by the previous fishing adjustment, you can also try to catch lead. During the floating adjustment, the float is adjusted to slowly sink into the water, and the fishing mesh can be selected to be about 2-4 meshes. When fishing, the space beans above and below the lead base should be distanced so that the lead pendant can slide in a small range. This method is the highest level of dullness.
Question 6: How to adjust and float him in lead fishing? What do you mean by pulling down 2 centimeters in this second step? The purpose of pulling down 2 centimeters is to adjust and float so that lead can't fall to the bottom.
you can't pull the float near the lead base unless the water is shallow when adjusting the float. Because the fishing line is also heavy, the closer the hook is to the bottom, the more accurate it is to adjust the drift.
Question 7: How to adjust the drift and find a way to catch lead in still water fishing.
1. Adjustment and trial fishing steps for leisure crucian carp:
(1) Basic drift adjustment steps for fishing bottom:
1. Rough bottom finding:
Heavy lead is hung on the lead base. (At this time, you can hang or not hang the sub-line. )
2. Adjust the eye:
Hang up the sub-line and float down about 3 cm (remember the distance of float down > The length of the long string +1 cm), at this time, the float should be completely submerged in the water, and gradually cut the lead skin until the required mesh number is exposed (adjust the mesh).
3. Basic principles for setting the eye adjustment and fishing purpose of crucian carp fishing:
7-mesh soft tail floating and rubbing bait: 4-5 mesh for about 2 mesh
7-mesh soft tail floating and pulling bait: 2.5-4 mesh for about 2 mesh
Hard thin tail rubbing bait: 7-9 mesh for about 2-3 mesh
Hard thin tail pulling bait. Fishing low, fishing spirit.
according to the weather, season, specific gravity of bait, size of bait ball, fish mouth, and other factors, fine-tune and adjust the eyes:
4. Find the bottom accurately:
Move the float, adjust the distance between the position of the float seat and the position of the positioned upper space bean to be roughly equal to the length of the sub-line, hook and rub the bait ball to find the bottom (and also make a nest), so that the float emerges from the water. It means that the bottom has passed, and the float is pulled back 2 cm. This action is called reverse bottom finding, and then the bait ball with normal fishing size is hung and thrown into the water, and the float is fine-tuned until the fishing mesh is about 2 meshes for trial fishing.
5. Adjustment process of trial fishing
(1) There is no fish in the mouth: fishing is too clever, pull up the float for 2CM (it can be pulled up for less than 5 consecutive times), and fish in the upper lip for more than 2 consecutive times to find the right mouth. (Tailing can be understood as finding the bottom incorrectly, but still leaving the bottom)
(2) The middle fish is on the mouth or chin, which means that fishing is too dull. Pull down and float 1 cm at a time until the fish is in the upper lip for more than two times to find the right mouth. (Too dull can be understood as finding the bottom incorrectly, and it has passed the bottom)
(3) There is no mouth to catch the bottom: pull down the float 15cm at a time to find the water layer where the fish is located, which belongs to the category of fishing off the bottom-floating-fishing for one standard depth, and it is necessary to cut the lead again and adjust the float, so that after hanging the double bait, the float will be exposed for about 2 eyes, and the other is said.
(2) Lead-running fishing method:
1. Scope of application: it is used when running water or small miscellaneous fish are hooked, and the fishing method is similar to traditional fishing.
2. Lead running and bleaching steps
(1) When there is no hook, the heavy lead will come to the bottom.
(2) float down 2CM, and cut the lead skin until it is level.
(3) The upper space bean of the lead ball opens about 5 cm.
(4) hang the sub-line, and pull the float up until it exposes 2-6 meshes, which can be used for fishing. 3. Precautions for lead fishing
(1) In running water environment, the float should be as large as possible, with strong positioning ability, such as No.3 float of Dao Lang A118.
(2) The sub-line should be kept as short as possible within 1 cm, because lead fishing is extremely blunt, and short sub-line can amplify the signal.
(3) You should grasp the movements of going up and down, and you can both catch fish.
(4) The bait can be properly sticky.
2. Detailed steps for leisure fishing:
1. If the floating phase only rises slowly but there is no next bite, or if it rises only slowly and falls in the shade, it can be adjusted by pulling down until there is a slow rise, and then there is a slight fish.
2. The drift phase only rises slowly, but there is no downward drift, so it is ineffective to adjust the fishing eye by pulling down the drift, which is mostly related to the bait state and size. You can adjust the bait state and bait application method in time before asking and exploring.
3. If the drift phase only rises slowly, but there is no drop-down drift, it is ineffective to adjust the fishing eye, bait state and bait application method, so you can reduce the lead and find a new mouth until there is a flat mouth and fish are caught.
4. The drift can't fall to the set fishing goal, or the high top doesn't fall for a long time. After eliminating the factors such as inaccurate rod throwing and bait loss, it is mostly caused by the fish interface. You can also pull down the drift to adjust or reduce the lead to find the mouth.
5. There are many fish in the nest, but there is still no mouth after adjusting the fishing orders. We should check the hook attachment rate and atomization rate of the bait. At the same time, it should be checked whether the fishing is too dull, drifting and fishing, and whether the bait falls into the mud layer with virtual bottom that the fish mouth does not recognize.
6. The adjustment of the agility of the fishing eye is all without a mouth, and the adjustment of the bait state and the bait application method are also ineffective. It is possible to reduce the lead, increase the adjustment of the eye, improve the bait carrying capacity of the drift, and enlarge the range of the adjustment of the fishing eye, so that the bait has more layers to choose from at the virtual bottom ...... >; >
question 8: how to fish when swimming badly? How to drift and catch lead? If you lower the fishing height, you can only run lead, or don't float to see the pole slightly < P > Question 9: How to adjust the float with a float tube? It is not recommended to adjust the float in a float tube. The buoyancy varies with the density of water in each place, and the float made by the same float is also different. What's more, the tap water is so clear and the buoyancy is so small?
steps of adjusting and finding the mouth
1. steps of adjusting and trying to fish crucian carp for leisure:
(1) basic steps of adjusting and finding the bottom:
1. rough bottom finding:
heavy lead is hung on the lead base, and the weight of the lead skin is greater than the buoyancy of the float, and all the floats are submerged, and the float is gradually pulled up until one eye is exposed. (At this time, you can hang or not hang the sub-line. )
2. Adjust the eye:
Hang up the sub-line and float down about 3 cm (remember the distance of float down > The length of the long string +1 cm), at this time, the float should be completely submerged in the water, and gradually cut the lead skin until the required mesh number is exposed (adjust the mesh).
3. Basic principles for setting the eye adjustment and fishing purpose of crucian carp fishing:
7-mesh soft tail floating and rubbing bait: 4-5 mesh for about 2 mesh
7-mesh soft tail floating and pulling bait: 2.5-4 mesh for about 2 mesh
Hard thin tail rubbing bait: 7-9 mesh for about 2-3 mesh
Hard thin tail pulling bait. Fishing low, fishing spirit.
according to the weather, season, specific gravity of bait, size of bait ball, fish mouth, and other factors, fine-tune and adjust the eyes:
4. Find the bottom accurately:
Move the float, adjust the distance between the position of the float seat and the position of the positioned upper space bean to be roughly equal to the length of the sub-line, hook and rub the bait ball to find the bottom (and also make a nest), so that the float emerges from the water. It means that the bottom has passed, and the float is pulled back 2 cm. This action is called reverse bottom finding, and then the bait ball with normal fishing size is hung and thrown into the water, and the float is fine-tuned until the fishing mesh is about 2 meshes for trial fishing.
5. Adjustment process of trial fishing
(1) There is no fish in the mouth: fishing is too clever, pull up the float for 2CM (it can be pulled up for less than 5 consecutive times), and fish in the upper lip for more than 2 consecutive times to find the right mouth. (Tailing can be understood as finding the bottom incorrectly, but still leaving the bottom)
(2) The middle fish is on the mouth or chin, which means that fishing is too dull. Pull down and float 1 cm at a time until the fish is in the upper lip for more than two times to find the right mouth. (Too dull can be understood as finding the bottom incorrectly, and it has passed the bottom)
(3) There is no mouth to catch the bottom: pull down the float 15cm at a time to find the water layer where the fish is located, which belongs to the category of fishing off the bottom-floating-fishing for one standard depth, and it is necessary to cut the lead again and adjust the float, so that after hanging the double bait, the float will be exposed for about 2 eyes, and the other is said.
(2) Lead-running fishing method:
1. Scope of application: it is used when running water or small miscellaneous fish are hooked, and the fishing method is similar to traditional fishing.