Installation instructions:
1. If the current computer doesn't have a system or can't start, please use another computer to make a startup USB flash drive.
General memory of 2.3G and below, with 32-bit system installed; 4G and above memory with 64-bit system installed.
Related tutorials:
Detailed process of one-key U disk loading system for Chinese cabbage
Onekeyghost One-click Installation of win7 System Graphics Tutorial
I. Preparation for Installation
1, back up important files on disk C and desktop.
2. System image download: the ultimate download of windows7.
3.4G or larger USB flash drive: How to make a USB flash drive for Chinese cabbage?
4. USB flash drive startup settings: How to set startup from USB flash drive?
Second, the manual installation system of Chinese cabbage U disk ghost is as follows
1. Make the U disk boot disk of Chinese cabbage first, and then download the iso image of ghost system. First, right-click WinRAR to extract iso to a specified directory, such as disk F, and find and copy the largest gho file, such as Win7.Gho; ;
2. Copy and paste the gho file into the GHO directory of the Chinese cabbage U disk, as shown in the figure;
3. Insert the USB flash drive into the computer where the system needs to be installed. After restarting the computer, continue to press F 12, F 1 1, Esc and other shortcut keys. Select the USB flash drive option, and then press Enter. For computers that don't support these buttons, check out the tutorial "U disk startup settings" mentioned above.
4. Start from the U disk to enter the main menu of Chinese cabbage, press the up and down arrow keys to select 02 to enter the pe system, and select 03 to enter the old model;
5. After entering the pe system, if you need to partition, you must back up all the important data of the hard disk, then double-click to open the DG partition tool, and right-click the hard disk to select quick partition;
6. Set the number and size of partitions. Select "Main Partition" for the partition where the system will be installed, which will be selected by default. If the capacity is above 35G, check "Alignment Partition" for 4k alignment, and click OK;
7. Then double-click the GHOST clone to open the desktop, and in the pop-up interface, click OK directly;
8. In this interface, click Local → Partition → From Mirror;
9. Click the triangle below to select the location of the GHO file. Bian Xiao in the gho directory of the U disk, click on the gho file, such as win7.gho; ;
10. In this interface, click OK directly;
1 1. Select the hard disk where the system is installed. Please note that the whole hard disk is displayed here. According to the capacity judgment, for example, the hard disk in the figure is 60G, select this 6 1440 disk, and click OK;
12. Select the installation disk letter here, the type must be primary, then select the installation disk according to the capacity, and click OK;
13, the prompt box pops up, click Yes to start the system installation process, just wait for the progress bar to complete;
14. After the operation is completed, a prompt box pops up, click ResetComputer to restart the computer, and the USB flash drive can be pulled out during the restart;
15, restart and enter this interface to install and configure the system, which will take about 5 minutes;
16. Finally, a brand-new system interface is entered, and the process of manually installing the system with ghost is completed.
The above is the whole process of how to manually install the system with ghost in Chinese cabbage. You can follow the above steps to complete the manual ghost installation of the system.