first step
Before installing the shelf, you need to prepare some necessary tools to understand the overall structure and installation precautions of the microwave oven. There are two grooves under the microwave oven, which are socket parts installed on the shelf of the microwave oven. Before installation, measure the distance and length of shelf installation, and then punch holes with a pistol drill to fix four feet.
Second step
Drill holes with a pistol, not too hard, so as not to damage the wall. In order to avoid tile cracking, the punching frequency should be well grasped and used in conjunction with the hole opener.
Third step
Add water before using the hole opener. This is made of emery. If it is overheated, it will burn out. Add water and cool it properly. If it doesn't work, consider using an electric hammer instead. Many stores sell them, and it is also very convenient to use when punching holes.
Fourth step
After fixing the points with a pistol drill or an electric hammer, install shelves at several points and fix them with screws to test their stability. The weight of a microwave oven is about 30 kilograms, so the bearing capacity of the shelf should exceed this range, so as to ensure its safe use.
Step five
Then, the last step is to install the microwave oven on the shelf, which is very important. Usually, there is a notch in the bottom of the microwave oven. As long as the gap is found, matched and fixed with screws, the microwave oven can be firmly and stably on the shelf.