Current location - Recipe Complete Network - Dinner recipes - What should I do if the noise is getting louder and louder when the sander hits something?
What should I do if the noise is getting louder and louder when the sander hits something?
Send it to the repair shop for repair.

Generally, commercial skates are not as loud as those made in China, because the horsepower of motors is different. If the noise is unusually loud, you'd better take it to the maintenance department for repair, because there may be a problem.

Commercial smoothies are usually made into smoothies or fresh soybean milk, which requires the smoothies to rotate at a very high speed, otherwise it is difficult to break the ice in a short time. Therefore, commercial ice makers are generally high-power motors, unlike household soymilk machines with only a few hundred watts.

Points for attention of skaters

1. In order to ensure safety, it is not allowed to cut the ice cubes directly by hand.

2. It must be cleaned after each use. When cleaning, turn off the main power switch, unplug the plug and dry the water on the machine with a clean towel. Remember to lift the handle of the gland after cleaning.

After working continuously for one hour, you should pause for twenty minutes before you start working. This will greatly extend the service life of the motor.