Preparation materials: all kinds of empty paper boxes (such as cans, moon cakes, biscuit boxes, toothpaste boxes, etc.), patterned wrapping paper, English newspapers, cardboard (used to increase the thickness inside).
A The storage box made of tissue paper box is just the right size for storing old tapes and other sundries.
B, a long toothpaste box, packed in English newspaper, can be used as a pen box with an inner box. It is a good sealing method to sew buttons and sealing lines at the opening.
C, add two drawers to a rectangular paper box with a long box of cosmetics as an inner box to make a jewelry box, which can accommodate earrings, necklaces and other small accessories.
D, three empty aluminum foil bags, cut open the box mouth, cleaned, dried, and pasted together, which can be placed on the desktop as a stationery box. .
Unique jewelry boxes are handmade.
The unique jewelry box looks very creative and exquisite, and its predecessor is just a finished milk box!
Preparation materials: small milk box, beautiful wrapping paper, a small piece of paper rattan, pearl board, corrugated board.
1, cut the milk bottle mouth, and fold the four sides of the milk box into the above shape by pressing the edges.
2. Cut the favorite wrapping paper into long strips and stick them on each side.
3. Draw the size of the box mouth and cut out a square box.
4. Lining the thickness of a pearl plate in the box cover.
Empty cans of potato chips are used to make storage cans and multi-purpose pen holders.
Materials needed to make this pen container: empty cans of potato chips and colored wrapping paper.
A, the top half with plastic cover is sealed at the bottom and decorated, which is an elegant storage tank.
B, the lower part was originally a complete cylindrical jar, just need to package it, that is, it becomes a pen container.
Hand-made vertical shelf
Keep the original shape of the milk box and stack it into a vertical shelf.
Materials required for DIY production:
4 long milk cartons, wrapping paper and photo glue.
1, first remove the bottom of the milk box as a basic part of the shelf.
2. Cut the milk carton diagonally and fold it into a triangle, as shown in the figure.
3. The finished triangle, as the base of the shelf, can make the whole body slightly inclined upwards, which is convenient for storing articles and not scattering.
4. After the bottom seat and the three basic shapes are packaged, they are stacked and bonded one by one, and you are done.
The production of creative CD racks with natural, rough and original flavor.
Materials to be prepared for making this creative work:
Corrugated cardboard (if the thickness is not enough, you can use two layers or add a layer of cardboard to increase the firmness) and branches of the waste paper box.
Manual production method:
Cut the corrugated cardboard on both sides with a width of about 37.5px at equal intervals, and then insert the branches to adjust the angle, and the CD rack can be completed.
Insert the CD horizontally into the incision on both sides, and put the album name outward for easy searching.
Handmade bookshelves
It looks good to make a unique and practical manual book and newspaper rack with these abandoned empty cartons and cartons!
Handmade materials to be prepared:
Cartons or cartons (about the size of magazines, books and newspapers), calendars and English newspapers (for packaging)
1, cut out a simple and generous shape, and paste it in English newspaper packaging, which is a practical book and newspaper shelf full of book breath.
2. On the diagonal of the carton, cut an arc into a fan shape, add recycled paper materials such as calendar paper, and after a little decoration, a durable and environmentally friendly book and newspaper folder will be completed.
Hand-made colorful and childlike animal storage boxes and lockers.
Materials to be prepared for making this storage box: discarded cartons and decorative paper.
1, the original waste paper box, it is best to choose rectangular and thicker.
2. Cut and fold the carton into a trapezoid as the basic structure of the lion.
Add the lion's face, use the paper to cut and paste, and outline the lion's shape, and you can complete the work.
What the box looks like when it is opened.
You can also design a favorite animal model and create a lovely animal storage box.
Manufacturing method of environment-friendly gift box
The following is a gift box that is very economical and environmentally friendly.
Preparation materials:
Milk box (long or small), wrapping paper, glue (or double-sided tape).
1, after removing the bottle mouth as shown in the line draft, draw a broken line on the milk box with strokes.
2. Use a ruler to assist the blade and gently draw a crease on the broken line.
3, according to the original cut crease, pinch off the bevel.
4. After folding four oblique angles, fix them in a rotating way.
5. Spread the paper with your fingers and sort out the shape of the petals.
6. The folded shape is as shown in the figure, but it has not been completed until now. The purpose is only to fix the crease first, so that the shape can be easily folded after packaging and the outer case can not be wrinkled.
7. First unfold the original folded shape and stick it on the surface with wrapping paper, with about 100px reserved up and down.
8. Cut the opening into four pieces and fold them into flat stickers.
9. Fold the bottom paper in the general way of packaging gift boxes, and then fold it again according to the original folding method, and you can fold the exquisite gift box.
How to DIY bookmark 1. Prepare various kinds of cardboard and ribbons. Think about the pattern and shape of the bookmark
2. Prepare cardboard and cut it into the shape you want to bookmark, such as leaves, rectangles, cartoon characters or animal shapes.
3. Cut other colored cardboard into cherry blossoms, four-leaf clovers, water droplets, cartoon animal shapes, etc. and paste them at one time (you can also draw patterns directly).
4. punch a hole with a punch above the bookmark and tie a ribbon.
Reference pictures can be Baidu, a lot of them.
First of all, you should prepare long post-it notes. Of course, it is the same to use colored paper, but you need to cut it into the right size yourself.
The color can be determined according to your own preferences.
Take out three.
Stick two of them on a flat surface (if it is colored paper, it will be placed crosswise).
Fold the lower sheet along the edge of the upper sheet, and repeat this step until it can't be folded any more.
Turn it upside down and fold it in the same way.
Stick it on one end of the third piece of paper.
Cut out the cardboard with the same size as the post-it note and coat one side with glue stick.
Finally, stick them together
be brought to successful completion
Measure the appropriate length on the cardboard and draw a thin line.
Cut it with a paper cutter at the scribe line to get a small rectangular cardboard.
Cut a regular triangle on the four corners of the cardboard with a paper cutter.
Write your favorite poem or draw your favorite picture with a pen on one side of the cardboard, and a simple bookmark will be completed.
How to illustrate tools/raw materials for diy cloth stickers
Paper, face cloth, lining cloth, and adhesive lining (the adhesive lining is harder) as well as linen, iron, zipper, needle, ruler and buttons.
Steps/methods
First, cut out the pattern according to the following size.
Then according to the pattern, cut out four pieces of cloth, which are face cloth, lining cloth, adhesive lining (the adhesive lining is harder) and linen cloth in turn.
Heat the adhesive lining for fabric wallet with an iron to make it stick to the face cloth.
Then cut a piece of lining that is narrower than the pattern, sew the zipper on it, and add the width of the zipper, which is as big as the pattern.
Front seam method of zipper
Then put these pieces in the following order, stretch them with thread, and then trim them neatly with pattern comparison.
10 cm wide and 75 cm wide, used to fold the card slot.
There are three card slots on the left and right, which should be exactly the same width as the wallet after folding.
After folding, the back is lined with a piece of the same big cloth and stretched with thread.
Use a piece of cloth and make a 3 cm wide diagonal strip at a 45-degree angle.
Then, according to the following method, edge the folded cloth.
Then compare the stretched side with the stuck side and stretch it.
The inside should be tight and the surface should be loose, so that it will be flat and beautiful after folding.
How to do DIY cake illustrated cake powder can be bought in the supermarket. The amount of cake powder is well prepared when bought, and it is not easy to make it delicious.
Practice: 1. Beat three eggs and beat hard (very important! Whether the cake is soft or not depends on whether the eggs are beaten evenly.
2. Add 3 packets of cake powder to the beaten eggs (several packets of cake powder for several eggs), and beat hard again)
3. Pour the mixed cake paste into a larger bowl (to make it easy to take out the cake completely when it is baked, coat a thin layer of cooking oil on the whole bowl), and cover the cake paste with a layer of plastic wrap, accounting for 3/1of the container.
4. Put it in the center of the microwave oven (it must be in the center, if it is off-center, the cake will be uneven), turn on medium heat, and it will take about 3-4 minutes to get out.
5. Find a beautiful plate, cover the cake upside down, spread cream or cream around the cake, and then put the cut fruit on the cake. If there is condensed milk, drop some condensed milk on the fruit, which is beautiful and delicious!
PS: Cream should be available in a cake shop. You can't make that smell yourself.