Japanese Triangle rice cooker is a high-quality electrical product, but some minor faults often occur in the process of prolonged use. These faults may affect the normal operation of the rice cooker, leading to cooking failure or causing damage, especially some fault codes are also more common in daily maintenance. Here we will learn about the fault codes of the Japanese Triangle rice cooker and how to solve these fault problems correctly.

1.E1 - Inner liner sensor failure

When using the rice cooker, if the fault code E1 appears on the display, it means that the inner liner sensor has failed. At this point, you need to check whether the sensor is damaged or has poor contact, and at the same time, clean the dust and dirt on its surface. If the problem still cannot be solved, you need to contact the relevant maintenance personnel for inspection and repair.

2. E2 - pan bottom sensor failure

If the fault code E2 appears on the display, it means that the pan bottom sensor has failed. At this point, we need to check whether the bottom sensor is in poor contact or damaged, you can re-plug and flip the cooker to keep it in the original position, and let the cooker automatically re-warning. If the same fault code still appears, you need to contact the maintenance personnel for repair.

3.E3--Heating Failure

When the rice cooker is cooking, if the E3 fault code appears on the display, it means that the heating device of the rice cooker has failed, and it can't heat up and cook normally. At this time, you need to stop using the rice cooker, wait for it to cool down, check whether the heating device has poor contact with the plug, and confirm whether the voltage is normal and other reasons, if you still can't troubleshoot after checking, you need to contact the maintenance personnel to further check the cause of the failure.

4.E7--Over-temperature Protection Fault

In the process of using the rice cooker, if the fault code E7 appears on the display, it means that the temperature of the rice cooker has exceeded the preset temperature, and the rice cooker will automatically enter the over-temperature protection mode, stop heating and deactivate, and when the temperature is back to normal, the rice cooker can be used normally. When the temperature returns to normal, the rice cooker can be used normally. If this happens, you need to check whether there is poor contact with the temperature sensor, whether the bottom of the rice cooker is clean, and so on, and then continue to use it after troubleshooting.

All in all, when the Japanese triangle brand rice cooker fault code, we should check the cause of the failure in a timely manner and correctly dealt with. If it can't be solved, we should contact the relevant maintenance personnel for repair in time to ensure the normal work and prolong the service life of the rice cooker.