Stainless steel kettle in the manufacturing process there is a polishing process, in order to improve the speed and quality of polishing, will use a kind of abrasive containing grease and metal oxides, these grease and abrasive more or less will be left on the surface of the stainless steel or in the crevices, before use to wash it. It is recommended to use a waste toothbrush dipped in alcohol to scrub the handle with the pot joints and the rest of the surface, after washing can be used directly with hot alkaline water to wash the pot all over again, and then rinse with water can be used. If there is no alcohol, directly with hot lye brushing is also possible. The inner surface of the pot as long as the mouth alkaline water can be cleaned, wash to pay attention to the mouth of the pot cleaning, because the polishing will be polished grease into the polishing.
So use alcohol and hot alkaline water to wash, because alcohol and alkaline water can dissolve the adhesive grease, so that cleaning can be more steep bottom.
The production of scale: mainly related to water quality. If the water is hard, insufficient oxygen in the water, water molecules are not stable, calcium and magnesium ions in the water solubility will be reduced, precipitation intensified, thus forming scale. As long as the water temperature exceeds 60 ℃, especially in the hard water quality of the north, there will certainly be limescale production, in the daily kettle, boiler will have limescale presence. The solution is to clean it regularly.
The removal of limescale:
1, put some confetti in the bottle, and then pour into the warm salt water, gently shake for a while, limescale can be removed.
2, can be poured into the concentration of 1% of baking soda about 500 grams of water, or vinegar heating into the bottle, gently shaking, scale can be removed.
3, the two eggshells slightly broken, into the bottle, and then loaded with half a teapot of cool water, plug the stopper and hold down with one hand, thumb and other fingers to hold the neck of the bottle, the other hand to hold the bottom of the bottle, up and down, left and right, rotating and shaking. About 20 seconds, remove the cork, pour out the eggshells, and then rinse twice with water.
4, 250 grams of vinegar, hot water bottle into the hot water bottle, soak for a few hours, and then up and down, left and right shaking, bottle limescale will fall off.
5, take 200 grams of dilute hydrochloric acid to put the bottle soaked for a while, and then shake the bottle to remove the scale.
6, with boiled noodles water poured into the bottle, shaking a few minutes after pouring, and then rinse with water can be clean.
7, take some sunflower leaves or pumpkin leaves cut into 3 cm to 4 cm square size fragments, into the bottle, and then add a little cold water, gently warm water bottle shaking a few times, and then wash with water.
Kettle descaling method a baking soda in addition to limescale
With aluminum kettle water, put a small spoon of baking soda, boil for a few minutes, limescale that is removed.
Kettle descaling method two vinegar descaling
If the kettle has alkali, you can put a few spoons of vinegar in the water, after boiling, the alkali can be removed.
Kettle descaling method three masks to prevent the accumulation of scale
In the kettle put a clean mask, boiling water, scale will be adsorbed by the mask.
Kettle descaling method four egg descaling
Boiling water kettle, used for a long time hard to remove the scale. In this regard, it can be used to boil the egg twice, will have the desired effect.
Kettle descaling method five potato skins in addition to scale
Aluminum pots or pans after a period of time, there will be a thin layer of scale. Put the potato peel inside, add the right amount of water to boil, cook for about 10 minutes to remove.
Kettle descaling method six thermal expansion and contraction method to remove scale
Empty kettle on the stove to dry the water in the scale, see the bottom of the kettle cracked or burned to the bottom of the kettle with a "bang" sound, remove the kettle and quickly injected with cool water, or wrapped in a rag on the handle and the spout, two-handed, the kettle will be burned dry to sit in the cold water quickly (do not let the water into the pot). Do not let the water into the kettle). The above two methods need to be repeated 2 to 3 times, the bottom of the kettle scale due to thermal expansion and contraction and fall off.
Kettle descaling method seven kettle cooking taro anti-scaling
In the new kettle put more than half a kettle of taro, full of water, will be cooked taro. Boil the water later, it will not accumulate scale. After the kettle boiled yams, the inner wall should not be scrubbed, otherwise it will lose the anti-scaling effect. For the old kettle has limescale, with the above method to cook 1 to 2 times after the taro, not only the original scale will gradually fall off, and can prevent the accumulation of limescale.
Put a magnet in the kettle to remove limescale
Put a magnet in the kettle, boiling water will make the thick bottom of the kettle limescale cracked, so it is easy to take out the limescale block.
New electric kettle how to clean the smell
Put more green tea tea, pour hot water, soak 1 to 2 days, if the taste is serious, repeat 2 or 3 times on the good, so that the water out of the water is also a little bit of tea, purely as a rule of thumb, I hope to be widely disseminated
Supplementary:
The newly purchased plastic kettle, there is generally a pungent Odor, even after boiling water, the smell is still there, the following a few tricks to remove the smell of the method to share with you:
1, you can use the plastic kettle to receive half a pot of tap water, add 2 spoons of salt, keep shaking (up and down, left and right), repeated a few times. Then boil the salt water, also repeated several times, will be much better. Because there will be small particles after the salt is dissolved, they can rinse the small pits on the surface of the plastic to remove the odor. Deodorization with vinegar is not good, because the strong acid will only corrode the plastic wall, the taste is heavier.
2, milk deodorization method: first clean with detergent, and then to the plastic kettle into two tablespoons of fresh milk, cover the lid, shake, so that every corner of the kettle and milk contact, about one minute, and finally pour off the milk, the kettle clean.
3, orange peel deodorization method: first clean with detergent, and then fresh orange peel into the lid, put the lid, put about 3 to 4 hours can be clean.
4. Scrub with waste tea leaves, then rinse with water, the flavor will be much lighter.
5, if the above methods can not remove the odor of the plastic kettle, and boil the water after radiating a strong *** sexual odor, consider not to use this kettle to drink water, may be its plastic material is not good, use it to drink water is harmful to health, change the kettle is more insurance.
How to clean a newly purchased hot water bottle? The first thing you need to do is to get your hands on a new bottle of water, and you'll be able to clean it.
In our daily life, every family has to use the hot water bottle, especially in winter,
more need it, because the weather in winter is colder, the family came to the guests, need to make tea, boil water. In this case, they use the hot water bottle for a long time is also need to maintain. If you do not maintain, it will be very easy to break, then they to analyze: how to wash the hot water bottle? How to clean better?
What need to pay attention to the scope: Now we come to observe: Thermos how to clean method / step
1 new to buy all the things, everything needs to be imported or close to the body of the things need to be cleaned, such as clothes, fruits, or other daily use of things. Thermos bottles, which store water directly for drinking, need to be cleaned even more.
2, pour a spoonful of vinegar into the thermos, and then fill it with about 80% hot water (50-70) or so. Vinegar has a sterilizing effect.
3, and then shake the thermos, shake a dozen times, and then pour out the water. The first cleaning water is dirty.4 Then fill the 50-70 degrees of water, also about 80%, and then shake, to produce the role of there is movement, in order to make the molecules strong movement, so that the inside of the not dirty things can also be cleaned, so that the repeated pouring of the cleaning a few times.5. And so vinegar flavor are removed, and then give the thermos bottle full of water, and then put it overnight until the next day, the water will be poured out, and then cleaned two times can be used! 6. Pouring water, do not use the faucet, so as not to splash water to the inner liner, and often use, do not a hot water for a while a cold water. It will shorten its life.
How to clean the inner liner of the hot water bottle: bottle liner limescale, most of the components are calcium carbonate and magnesium carbonate. We can use white vinegar to pour into the bottle liner and shake it constantly. Soon the scale will fall off. If you can buy vinegar essence on the market, the effect is better! PS: Towel with a long time will also be scaled, will feel the surface has a lot of hard points, you can also use white vinegar, vinegar essence soak cleaning. The towel will be soft again.
Teach how to clean the hot water bottle limescale tips: life, the home of the hot water bottle loaded for a while on the inside wall of the boiling water will be a layer of limescale, how to clean the limescale on the inside wall? The following
small
3, to tell! Tools / raw materials with limescale hot water bottle old vinegar or white vinegar hot water
1 with limescale hot water bottle with vinegar (domestic hot water bottles generally 1-2 two vinegar is enough to see how much limescale discretion to add) 2 in the hot water bottle with vinegar plus hot water (hot water is better), the amount of water is best for the capacity of the 90% so that it can make its full infiltration of the 3 will be added to the water with the vinegar of the bottle and let the hot water bottle shaking evenly. Every corner of the hot water bottle with vinegar shake evenly and let the water invasion to, let stand for about 1 hour can be (such as more thick scale, invasion of a better day) 4 will be infiltrated with a good hot water bottle fully shaken (the best side of the shaking side pouring) and then pour off the water, bright hot water bottle will be born. 5 old vinegar infiltration of water bottles will be vinegar flavor, can be used to clean the infiltration of tea to reduce the vinegar flavor. White vinegar infiltration of vinegar flavor is less.
Before also do not understand how to wash the new hot water bottle, now read this article, also learned a lot. Don't underestimate the washing of a hot water bottle, it is very learned, can learn a lot of knowledge through it, in our daily life, doing housework is essential!
Just bought a kettle, how to clean?
Add some vinegar, hot water, cover the lid and shake for a few minutes, pour it out.
Add some lemon juice, hot water, cover and shake for a few minutes, pour out.
Boil a pot of hot water with the lid on, wait two to three hours and pour out the hot water, leave it uncovered for a few minutes.
How to clean the liner of a newly purchased thermos?
Cleaning thermos bottle liner as long as the hot water and vinegar is good, the water temperature is not too high, sixty or seventy degrees is almost. Pour it in, indistinctly, and then soak for a few minutes, and then clean it with water.
How to clean a newly purchased electric kettle for the first time
After cleaning once, add water to boil, cool to not hot when cleaning with a rag. Finally, use water again.
How to clean a newly purchased kettle
The most convenient way is to use Coca-Cola, pour it in to a shake, and then rinse with water. It's actually very acidic.
Newly bought back to the kettle to wash it I did not wash directly burned to drink no problem
Be sure to wash, to wash the boiling water, one or two pots, the third pot can be eaten, because the new pots of bacteria and dirt, disinfecting is better to drink directly is not very good, but your body is good, how big a problem no, it is best to disinfect the future as well
How to clean the newly purchased electric kettle
1. Milk deodorization method:
First use detergent to clean the kettle, and then pour two spoons of milk into the kettle, cover the lid, shake vigorously, try to make every corner of the kettle is stained with milk, about 1 minute after pouring off the milk, the kettle will be clean.
2. Salt deodorization method:
After buying a new electric kettle home, put half a pot of tap water, add 2 spoons of salt, constantly up and down, left and right repeatedly shaking a few times, and then boil the salt water and then pour it out, repeated a few times, the plastic flavor will be much smaller. Because, after the salt is dissolved, there will also be small particles, repeated shaking, you can rinse the plastic surface of the small pits, to achieve the role of deodorization.
3. Tea deodorization method:
Scrub with waste tea leaves, and then rinse with water, both to make full use of discarded tea leaves, electric kettle plastic flavor will be much lighter, green and practical.
4. Orange peel deodorization method:
First, use detergent to clean the electric kettle, and then fresh orange peel into the lid, put about 3-4 hours, shabu clean.
How to clean a newly bought kettle?
Newly purchased kettle first rinse with water, and then use potassium permanganate into a moderate concentration of solution for soaking disinfection (no potassium permanganate can also be omitted from this step), and finally poured out the potassium permanganate solution filled with boiled water to be placed on the night
Thermos kettle how to remove the limescale?
1, pour some hot vinegar into the bottle gallon, cover tightly, shake and leave it for half an hour, and then wash it with water, the scale is removed.
2, add 200 milliliters of dilute hydrochloric acid, or add 50 grams of baking soda and a cup of water, according to the aforementioned method of shaking can also be.
3, the eggshells broken in a thermos, and then pour a few drops of detergent and the right amount of water, cover the lid up and down shaking, and finally rinse with water can be.
4, put 1 tablespoon of salt in the hot water bottle, fill with hot water, soak for 10 minutes, and then rinse with hot water, the inside of the bottle is bright as new.