Steps:
The knitting tool is fixed on the desktop with knitting thread, the thread head penetrates the lower part of the knitting tool through the installation hole, and the two ends are fixed on both sides of the tool.
The braided wire is wound around the rope frame for the first time, and the thread ends penetrate the upper part of the braiding tool through the first group of holes, and the two ends are fixed on both sides of the tool.
Clamp the thread on the left side of the knitting tool between the right index finger and middle finger, and clamp the thread on the right side between the left index finger and middle finger to start knitting leaves.
The thumb of the left hand is turned inward from the first group of grooves, and the right side line is twisted into an "8" shape, and then twisted on the left side line to form a small ring, bypassing the left side line and passing through the right side line from the ring.
Tighten the right line to the left to form a vein. Then continue to weave leaves to the left.
Switch wrists and start knitting the next leaf.
Repeat the above steps until the required length is woven.
Cut off the thread and tie the ends with scissors.
These are the simple steps of weaving the leaf hand rope. Different shapes and styles can be created by different wire and color combinations. I hope this tutorial will be helpful to your hand-knitting road.