Beijing U5 Wiper Replacement Process
Take the front of the car as the force guide, break the rain and blow, and it will be firmly stuck when it reaches a certain position. Press the fixed button device of the rain wiper blade, hold the wiper blade with your hand, gently and forcefully twitch outward, and take out the old rubber strip.
(Note: Don't swing the wiper arm backwards, otherwise it will easily damage the glass. A piece of cloth on the glass can cushion the pressure and prevent scratches. )
Loosen the two buckles and tear off the old tape. Don't use brute force when removing the middle joint and the buckles at both ends, and the plastic covers at both ends can't be removed. )
When replacing the adhesive tape, the two metal pieces of the wiper can be staggered up and down, and the first groove is the correct position of the adhesive tape. The whole process is a bit cumbersome and requires patience. If they cannot be installed at the same time, please install them side by side.
After the new tape is successfully put back, the wiper can be put back to its original position in the reverse order of the removal process.
Note: The disassembly process of some models' wipers is complicated, which tests the hands-on ability of the owners. The owner can read the instructions before replacement, and if the problem cannot be solved, hand it over to a professional master for replacement.