Bricklayer can be said to be one of the most important links in family decoration. If this face project is not done well, it will greatly affect the beauty of the overall decoration. There may be many owners who still don't understand the difference between bricklayers and masons, what bricklayers mainly do, the construction process of bricklayers' decoration and the matters needing attention in bricklayers' decoration. Let's take a closer look.

First, the difference between bricklayers and masons

There is not much difference between bricklayers and masons. At present, there is no difference between bricklayers and masons. Because today's masons are also called masons or masons, simply speaking, they are construction workers engaged in bricklaying _ tiling and other work. The bricklayer's work is a work with a long history, but it is actually a technical work, and anyone can do it after simple training.

Second, what does the bricklayer mainly do?

1, tear down and change

When decorating, if the owner is not satisfied with the structure of the room, then the indoor non-bearing wall should be removed according to the design scheme, and then a new wall should be built again, including plastering.

2. Waterproof material

The waterproof project of kitchen and bathroom also needs bricklayers, which is an important part of the waterproof project and one of the bricklayers' jobs.

3. Leveling

Also, leveling is also a bricklayer's job, and leveling is also called cement mortar leveling. Leveling is divided into wall leveling and ground leveling, and wall leveling is connected with new wall technology. The leveling of the ground depends on whether the ground is tiled or floor. If you are laying the floor, you must level it. If it is tiling, there is no need to level it in order not to waste too much time.

4. Paste

Tiling is also necessary for bricklayers: it can be divided into wall tiles, floor tiles and skirting lines. Wall tiles should be pasted from bottom to top, and there should be seams between wall tiles and floor tiles, otherwise it will be ugly. Pay attention to empty drum phenomenon and mortar saturation when sticking bricks.

Third, the bricklayer decoration construction process

1, masonry, embedment: all pipelines are embedded (water supply and drainage roads, strong and weak current lines) and the walls are demolished and bored according to the design requirements.

2. Plumber, wiring: installation and layout of circuits, waterways and gas circuits.

3. Masonry (water) bricklayer, civil engineering and surface decoration of wall and floor tiles: burying trunking, building walls, repairing various walls of heaven and earth, and laying floor tiles.

4. Woodworking, decoration and decoration production: all decorative surfaces (walls of heaven and earth) and furniture shall meet the design requirements.

5. Painters, furniture and wall coatings: all wooden furniture, decorative surface coatings, ceiling and wall coatings (latex paint, wallpaper wall covering).

6, plumber, lamps and sanitary ware installation.

7. Others: wooden floor curtain installation, self-purchased hardware pendant installation, overall land reclamation and cleaning.

Four, bricklayer decoration matters needing attention

1, the bathroom is waterproof

When decorating the bathroom, it should be noted that the bathroom should be waterproof before tiling. The bathroom floor should be paved with waterproof and non-slip tiles, and antique tiles are a good choice. The water absorption rate of the wall tiles in the bathroom should be lower than 5% to prevent the wall tiles from discoloring due to moisture.

2, ceramic tile procurement

It is recommended to buy more tiles when choosing tiles, because tiling will consume a certain amount of tiles more or less, and different batches of the same type of tiles will have color difference, so we need to buy more 10% tiles. Ceramic tiles with high water absorption need to be soaked in water to prevent hollowing, and joint filling can only be carried out after 24 hours. Tiles can't be returned after soaking in water. Soak them in boxes. You can keep 2-3 tiles at home.

3, understand the decoration order

Masons were built after hydropower transformation. Before sticking the wall tiles, be sure that the hydropower transformation has passed the acceptance test, otherwise problems may need to be removed and reworked. In addition, before the construction, the bricklayer should check the ground levelness, wall verticality and yin-yang angle of the original house one by one. If there is any impact on the construction quality, he should immediately report to the project manager to discuss the solution.

4. tear down and change the house.

In the actual decoration, it is inevitable that some people will be dissatisfied with their own huxing, so they have to tear down the house. However, in the construction of masons, we should pay attention to the following points: it is not allowed to destroy the load-bearing structure; The external wall is undamaged; Don't destroy the waterproof layer; It is not allowed to increase the floor static load; Coal mine gas pipeline is not allowed to be buried in the wall. These are all related to the safety of the house, so everyone must pay attention to it during construction.

The above is about the difference between bricklayers and masons, and what masons mainly do. I hope I can help you!