how to adjust the color of Huawei's mobile phone when it is not bright

If you use Huawei Mate4Pro mobile phone, you can turn on the AI ? ? photographer function.

AI photographer is a preset camera function, which can intelligently identify the objects and scenes (such as food, beach, blue sky, green plants, words, etc.), automatically optimize the color and brightness, and help you take better photos.

1. turn on the camera and select the photo mode.

2. click AI photography to confirm that it is turned on.

3. aim the lens at the subject, and after the camera recognizes it, it will automatically recommend the corresponding mode for you (such as portrait, green plant, text, etc.).

4. To close the recommended scene mode, click the close button next to the recommended mode text, or close AI photography.

You can operate as follows:

1. Find the camera of the mobile phone in the main interface.

2. Click Open to enter the shooting interface.

3. Click the mode selection in the lower right corner.

4. then select "off" to restore the original mode.

How to deal with the color distortion of mobile phone photography:

1. Because the connection between the mobile phone and the built-in camera of the mobile phone depends on the connection between connectors, in some cases, excessive shock and beating may cause contact problems in the connection of connectors, which is that the image signal cannot be transmitted to DSP (Digital Image Processor) normally, and the decoded image appears distortion and NOISE phenomenon.

2. There is also the problem of DSP. Because DSP is installed on the motherboard of the mobile phone through SMT (surface mount technology), the state of SMT may also affect the transmission or output of signals, causing problems, and this result will also be caused by excessive oscillation and beating.

3. When the lighting conditions in the shooting environment are poor, the camera cannot get the correct white balance.

4. If the manual white balance is inconsistent with the actual situation, you can try to turn on the automatic white balance.

how to color a mobile phone?

first, set the basic parameters.

(1) camera settings: open the grid, mirror the front lens, intelligent HDR

(2) record video-select format

3. accessibility-display and text size-reduce white point value by 25%

(4) retention settings: open exposure adjustment

(5) settings-camera-best compatibility <

1. exposure: control the amount of light. If you need a lot of light, increase the exposure, and if you don't need much light, decrease the exposure. 2. Brightness: Adjust the overall brightness of the photo. 3. Highlight: Adjustment of brightness in the whole picture. 4. Shadow: adjustment of darkness in the whole picture. 5. Contrast: Make the overall brightness brighter and the dark part darker, highlighting a contrast. 6. Brightness: Adjust the brightness of the color. 7. Black spot: It represents the purity of the black part. The higher the black spot, the darker the black (less used). 8. Natural saturation: the change of color (adjust the brightness of the object). 9. Natural saturation: the change of color with small adjustment range. 1. Color temperature: adjust the picture atmosphere, warm color and cool color. It depends on the picture atmosphere you need to show. 11. Tone: Adjust the cyan and red of the picture. 12. sharpness: strengthen the contour line and depict the details of the object. 13. sharpness: the range of action is higher than sharpness, and the texture of the object is extracted. 14. Noise elimination: Noise can actually be understood as light spots. When the light is bad, the quality of the drawing is not high, and part of the light will faint into a blurred piece. Using noise elimination can also improve the image quality to some extent. 15. Halo: Let the four corners of the picture darken from the outside to the inside (less used). The above parameters need to understand their respective meanings and what changes can be brought to the photo, and then adjust them appropriately according to the actual situation. For the specific adjustment range, please refer to the common filter adjustment parameters.