What material is good for TV wall cloth?
There are many kinds of wall materials with TV background wall. Generally speaking, there are mainly non-woven wall materials, pure cotton wall materials, natural fiber wall materials and fiber printing materials. So what material should be used for TV wall cloth? This depends on the characteristics of wall coverings made of different materials.
1, non-woven wall covering material
Raw materials: synthetic natural fibers such as cotton and hemp;
Features: bright colors, smooth and elastic; It is not easy to age and break, and has certain air permeability and moisture resistance.
2. Pure cotton wall covering material.
Raw material: pure cotton is specially treated, printed and coated;
Features: non-toxic, tasteless and breathable.
3. Natural fiber materials
Raw materials: wall covering material woven from natural fibers;
Features: natural and environmentally friendly, with natural and simple decorative effect.
4, fiber printing materials
Raw materials: medium-alkali glass fiber cloth as the basic material, and the surface is coated with wear-resistant resin;
Features: There are many kinds of colors, which are very bright and have good fire resistance and moisture resistance.
How to paste TV wall cloth
After the TV wall cloth is purchased, it will face the problem of paving. So how to paste the TV wall cloth? For TV wall cloth paving, the specific steps are mainly as follows.
1, measuring size
You need to measure the size of the background wall, then write it down and buy wall covering online or in a physical store. Be sure to pay attention to the size when buying, so that it is easy to handle when paving.
2, deal with metope
After buying the wall coating with the corresponding size, we immediately faced the treatment of the wall. For the treatment of the wall surface, you can directly use the cement paint that has just been done to make the wall surface smooth.
3. Wall glue solution
Pour the glue into the bucket and soak it with a roller. Wait a few minutes before you take it out. Where the wall surface needs to be pasted with wall covering, roll it back and forth with a roller until the whole construction surface is covered with glue.
4. Paste wall covering.
Spread out the purchased wall covering and stick it on a high place, which is convenient for pasting wall covering. When pasting, you need to paste wall covering diagonally. Pay attention to the fluency of the post, and be careful not to go up and down.
5, metope covering leveling
After pasting, you need to press the wall skin by hand, and then scrape it flat with a scraper. When scraping the corner, it must be leveled to ensure that there are no wrinkles and corners.
6. Finishing treatment
After scraping the wall covering, trim the edges and corners with a sharp blade and cut the wire hole with the blade. You need to scrape it again with a scraper after trimming. Cut out the wallpaper of the border and paste it according to the same steps. Wipe it with a cloth to prevent sticking.