If E2 is displayed immediately after the machine is turned on, it may be:

1. The thermostat socket falls off

2. After dry burning to protect the machine, the internal temperature of the machine does not drop, resulting in an abnormal start (after the temperature of the machine drops, pay attention to turn off the machine immediately without unplugging the power supply, and the internal fan will continue to run for about one minute after unplugging the power supply).

3. The thermostat handles some circuit problems.

4. If E2 is displayed after working hours are interrupted, it may be because the ambient temperature is too high, which leads to the internal temperature being too high, which leads to the protection being closed, or the inlet and outlet are blocked, resulting in poor heat dissipation.

Extended information:

Safe operation of induction cooker: The following safety measures must be taken when installing and operating the cooker.

one.

1. Please check whether the furnace surface is cracked or damaged before use. If it is damaged, don't use it.

2. Do not use the power cord when it is damaged.

3. No matter how damaged the stove is, please don't try to repair the cooking stove yourself.

4. Keep away from water and heat sources, and make sure there is enough space to put the stove.

5. Use appropriate stainless steel pot and flat-bottomed pan. Do not turn on or start the power supply before turning on the pots and pans.

6. The stove is only for domestic use and cannot be used for commercial purposes.

7. Don't touch the plug with wet hands.