You can download the ISO image of Linux system from Ubuntu, deepin or official website of uos, and then burn a CD or make a startup USB flash drive.
Modify the startup priority order in the motherboard BIOS, and directly start the startup system by installing CD/u disk. For the new hard disk, you need to partition and format it first, and then follow the installation wizard step by step to complete the installation.
The official website, a major Linux system, usually has learning resources such as installation tutorials or videos for reference.
How to open the CD-ROM drive under linux?
1. Find the full path name of the CD. At the command line, enter: ls-l/dev | grep rom.
You can see that the name of the CD is cdrom 1.
Remember to unload the CD after using it. On the command line, enter umount/mnt. Then you can't see the contents of the CD if you enter the /mnt directory again, which means that it has been uninstalled successfully.
How does Acer neokylin Linux set the CD-ROM drive to start?
Press del (some motherboards are f2) to enter the BIOS before booting into the system, find the BootOrder/BootSequence, set the optical drive to the first position (press "+",some are f5/f6), and then press f 10 to save and restart. Remember to change the hard disk back to the first location after installing the system, otherwise it will affect the boot speed.
How can I put linux back into windows without an installation disk?
After installing linux, a computer with WINDOWS cannot reinstall the WINDOWS operating system without an installation disk. To install the WINDOWS operating system back, you must find the WINDOWS installation CD, or you can install a virtual machine in the linux operating system and install the WINDOWS operating system in the virtual machine, but you should use the WINDOWS installation CD anyway.
How to install cdlinux into a USB flash drive?
Step 1: Burn the image of CDlinux to a USB flash drive with UltraISO. Open UltraISO and find the folder where CDlinux is located in the "Local Directory" in the lower left corner.
Find images with suffix "". Iso "and double-click to enter the image file.
Select the "CDlinux" folder in the image from the "CD Directory" in the upper left corner, and be sure to select it.
2
Click Start-Write Hard Disk Image in the menu bar.
three
"Hard disk" Select your USB flash drive, and you must see it clearly here.
Then check whether the path of the "image file" is correct.
The default writing method is "HDD+", which does not need to be changed, and other options can also be defaulted. The last point is "writing".
(If you have previously installed PE like peaches on the USB flash drive, then select "Format" first. Remember to back up the data on the USB flash drive. )
four
Usually wait a minute or two, and the recording will be completed. After burning successfully, the file on the USB flash drive looks like this:
five
Step 2: Copy 4 files to the USB flash drive.
Open the downloaded "grub4dos" compressed package, and copy the three files in it to the USB flash drive.
grldrgrub.exemenu.lst
six
Open the "CDlinux" folder of the USB flash drive, and then open the "boot" folder.
Copy the "splash.xpm.gz" compressed package to the USB flash drive.
seven
Step 3: Add a boot to the USB flash drive.
Open the downloaded "grubinst" compressed package and open the "grubinst_gui.exe" file.
eight
"Disk" Select your USB flash drive and judge it according to its capacity.
Check the following three options:
"Don't save the original MBR", "Don't start the original MBR" and "Don't search floppy disk when Qidong"
Then "install".
nine
ENTER the DOS window and press enter to install.
10
Step 4: Here, there are 6 files on the U disk (1 folder, 5 files). Check whether your documents are complete.
1 1
Step 5: Select the file "menu.lst" and open it with Notepad. Insert the following code into it:
titlestartCdlinux
find - set-root/CDlinux/bzImage
kernel/CDlinux/bzImageCDL _ DEV = LABEL = CDLINUXCDL _ LANG = zh _ CN。 UTF-8
initrd/CDlinux/initrd
boots
Fill in the red box with the label of your USB flash drive, which is the name of the USB flash drive. Rewrite according to your situation. Don't change other codes! ! !
12
I don't know the children's boots marked on the USB flash drive Look here. The English in the red box is a label.
13
At this point, the USB flash drive startup tool of CDlinux is completed. Reboot into BIOS and select USB flash drive to start.
The interface of CDlinux is quite beautiful.