PR method course of adjusting video picture color;
1. Open the software to import the material, create a new sequence according to the size of the material, switch the workspace to the color workspace when toning, and then judge the color distribution of the material with component RGB mode and vector oscilloscope YUV within Lumetri.
2. If it is the first time to open the color workspace, right-click the material and select the preset component RGB mode. You can also right-click the material and select vector oscilloscope YUV.
3. The parameters on the left side of the component RGB mode are 0 to 100, where 0 corresponds to the dark part of the picture, 100 corresponds to the brightest part of the picture, and 20 to 80 corresponds to the color distribution of intermediate tones; The parameters on the right are 0 to 255, corresponding to the values of each color channel.
4. When you meet a picture with a character in video color matching, you can turn on the vector oscilloscope YUV, and multiple colors are connected into a broken line, and the color range during color matching is mainly within this line; The middle part is the saturation of the current material, and there will be someone's skin color indicator line in it, which coincides with the displayed line, indicating that the big face of the character has no color cast.
5. Open the curve and adjust it appropriately, and you will find that increasing the red and green in the picture is equivalent to increasing the yellow in the picture; Increase the blue and green in the picture, the picture will be blue, and so on, so through these two oscilloscopes, you can directly see the color distribution of the picture and adjust the color.
6. fx in 6.Lumetri color stands for switching effect switch; The arrow on the right is the reset parameter, which can be restored to the default material color; Click the drop-down triangle arrow of the current Lumetri color to display the current color matching command, which can be added or renamed separately and cleared.
7. After clicking Add Color Effect, you can use the tools inside to adjust the color of the picture; There are six sets of color matching patterns in this command. Click the left mouse button to expand it. These commands can be used to color a single fragment or the entire material, or they can be used together.
8. As shown in the case, adjust the color of the picture, first turn on the basic correction, set the input LUT to LOG mode, and restore the original gray level of the picture normally; Then the shadows, highlights and midtones are adjusted by component RGB mode. After the adjustment is completed, click the hook preview in the upper right corner to complete the first-level color matching.
9. Open the HSL assistant, click the eyedropper tool to absorb the facial area of the person, and its color range will be displayed; Check the color gray, you can see the color absorbed by the straw, and add and subtract it through the straw to absorb its color properly; Then increase the ambiguity appropriately to make the edge too soft.
10, the color gray will be deselected, and adjusted properly in the correction to brighten the face and complete the second-level local color matching; It is suggested that color matching can be divided into primary color matching and secondary color matching.
After a simple color matching process, our video effect can show that its brightness is much higher and the effect is more perfect.
How does PR adjust the color of video images? PR "How to adjust the color of video images", Feather Rabbit will share it for you here, hoping to help you with your study! Premiere is widely used, mainly in the field of video editing and editing. It can cooperate with PS, AE, AU, AI and other software to produce professional film and television animation works. If you can't learn, if you want to learn, please click this link and follow our professional video lecturer to start learning: