With the advancement of fashion trends, there are more and more styles of belts. The double-ring buckle belt is one of them, but many people don’t know how to tie it. Today we will teach you how to tie the double-ring buckle belt. belt.

1. First, straighten the belt and pass the belt through the waistband with the small opening on the outside and the big buckle on the inside.

2. Pass one end of the belt through the two buttons.

3. Pull one end back and let the head pass between the two buttons.

4. Tighten the belt to make it fit and let the long end pass through the other end of the pants, so that the belt is tied

What to do if the belt is too loose:

Try the belt on, measure it, see how long it is, and remember the general size. It's best to hold the long part with your hands. Take it off, align the two ends of the belt, usually there are decorative buttons on both ends, and draw a roughly long part at the end. Use scissors to cut the long part a little shorter than the measured size, leaving room for sewing.

Sew it together with thread of a similar color to the belt. Note that the colors must be similar, the same color is best. After sewing, you need to lock the opening and use the edge shape. If you really can’t, just sew it over. It is to prevent disconnection. In this way, the size of the belt is appropriate. However, it cannot be tied on both sides, but can only be tied on one side. The middle interface is placed exactly in the middle of the waist at the back, which looks like it was specially set.