2. Fill a metal lunch box or a vessel with fast heat transfer with boiling water, put it in the freezer and close the door. Change the water every 20-30 minutes until most of the frost falls off or melts. Pay attention to wipe the surroundings with a towel at this time.
3. Some places that are difficult to melt can be hot compressed with hot towels to melt the ice. I don't recommend using a hair dryer to melt it, because the temperature of the hair dryer is difficult to handle, and it is easy to deform the inside of the refrigerator because of high temperature.
4. The frost on the freezing chamber wall begins to fall off in one piece, and the cork shovel gently shovels the remaining frost. Finally, clean the surrounding area with a clean towel.
Many people think that a frost-free refrigerator is a refrigerator that will not frost, but it is not. The frosting problem of frost-free refrigerators and ordinary refrigerators has brought troubles to many people. Defrosting is a very annoying thing. If the defrosting method is not appropriate, it will also have a certain impact on the life of refrigerators.
Many people think that a frost-free refrigerator is a refrigerator that will not frost, but it is not. The frosting problem of frost-free refrigerators and ordinary refrigerators has brought troubles to many people. Defrosting is a very annoying thing. If the defrosting method is not appropriate, it will also have a certain impact on the life of refrigerators.
1 If there is no frost in the freezer of the refrigerator, you can adjust the temperature of the freezer. After lowering the temperature in the freezer for two or three hours, the frost in the freezer will naturally melt. At this time, apply a layer of cooking oil inside the freezer of the refrigerator, and there will be no frost in the freezer in the future. 2, first disconnect the power supply of the refrigerator, all the food inside the refrigerator.
Take it out. Then put the container filled with hot water in the freezing chamber of the refrigerator, wait for about 10 minutes, and then fill it with hot water. After repeated twice, the frost blocks in the refrigerator will begin to fall off.
3. When the refrigerator needs defrosting, the power supply should be cut off first. There are many ways to defrost the refrigerator. At this time, we can choose to use a hair dryer or an electric fan to defrost the frosted part in the freezer. After the strong wind blows, the frost in the refrigerator will melt quickly, which can save time and effort. ?
4. We should stick a thick plastic film on the inner wall of the freezer according to the size of the refrigerator. When defrosting the refrigerator, take out the food in the refrigerator, and then shake the plastic film stuck in the freezer, and the frost will automatically fall off. Then we stick a piece of plastic film on the inner wall of the freezer, and it will work again in the next defrosting.
The above are some introductions about the defrosting methods and tips of the refrigerator. It should be reminded that during the refrigeration process of the refrigerator, the moisture in the box will condense into a frost layer on the surface of the evaporator. The heat exchange on the surface of frost evaporator will cause some obstacles. If the frost layer is thicker, the refrigeration effect will be worse. Therefore, when the frost layer on the surface of the freezer generally reaches about 5 mm, it needs to be defrosted.